Table Of Contents

Symbols - A - B - C - D - E - F - G - H - I - K - L - M - N - O - P - R - S - T - U - W - X -

Index

Symbols

? command 6-2

A

abbreviated commands, entering 6-1

abort command 4-38

aborting command output 6-8

admin command 3-40

administration configuration mode 4-19

administration EXEC mode 4-19

alarm correlation, logging 5-13

alarm logging

correlation 5-13

locations 5-12

severity levels 5-12

alias command 6-16

aliases, introduction 6-16

alphanumeric LED display

DRP PLIM illustration 4-5

PRP-2 illustration 1-12, 4-6

RP for 16-slot LCC illustration 1-10, 4-3

RP for 4-slot and 8-slot LCCs, illustration 1-11, 4-4

alternative configuration, loading at startup 4-33

anchor characters A-4

B

BGP, configuration limits 5-23

bgp maximum neighbor command 5-23

bring up

multishelf system, first time 3-3

standalone router, first time 2-2

verification

Catalyst switch 3-18

fabric cabling 3-44

FCC 3-34

non-DSC LCC 3-38

spanning tree 3-39

standalone router 2-4

C

cabling schemes for multishelf systems 3-20

capitalization, keyboard shortcuts 6-19

cards

CRS-FCC-LED See OIM LED

DRP PLIM 4-5

OIM LED

illustration 3-45

LED interpretation 3-44

PRP-2, illustration 1-12, 4-6

RP for 16-slot LCC 1-10, 4-3

RP for 4-slot and 8-slot LCCs 1-11, 4-4

card type, displayed in prompt 4-12

characters

anchor A-4

parentheses for pattern recall A-5

pattern ranges A-2

special A-2

underscore wildcard A-4

Cisco Catalyst 6509 Switch

configuration 3-8

hardware requirements 3-9

restrictions 3-10

software requirements 3-9

Cisco IOS XR software

supported standalone systems 1-1

cisco-support user group 4-14

clear command 4-34, 7-11

clear configuration commit command 5-11

clear configuration sessions command 7-13

CLI

identifying command mode 4-18

introduction 1-6

logging in 4-11

prompt 4-12

clock, setting the router time 4-44

clock set command 4-45

clock timezone command 4-44

clock update-calendar command 4-45

command-line interface See CLI

command mode

administration configuration 4-19

administration EXEC 4-19

CLI prompt 4-18

configuration submodes 4-20

EXEC 4-19

global configuration 4-20

interface configuration 4-20

navigation 4-17

navigation example 4-22

ROM monitor 4-21

router configuration 4-20

router submode configuration 4-21

commands

abbreviated 6-1

aliases 6-16

applying templates 6-15

completing a partial command 6-4

creating templates 6-13

identifying syntax errors 6-5

more prompt, responding to 6-7

no form 6-5

on-screen help 6-2

output

filtering 6-8

halting 6-8

narrowing 6-8

redirecting to a file 6-8

recall deleted entries 6-18

redisplaying 6-18

wildcards 6-12

wrapped lines, editing 6-5

commit best-effort command 4-35

commit command 4-34

commit comment command 4-35

commit confirmed command 4-35

commit force command 4-35

commitIDs

clearing 5-11

displaying 5-7

displaying changes 5-7

loading changes 5-9

commit label command 4-35

commit replace command 4-35

committing a configuration 4-34

complex expressions A-3

configuration

Cisco Catalyst 6509 Switch 3-8

clearing changes 4-34

committing 4-34

displaying 4-26

ending a session 4-38

files, storage 4-36

limiting 5-19

limits

BGP 5-23

IS-IS 5-20

MPLS 5-27

multicast 5-26

OSPF 5-21

other 5-27

RPL 5-25

static routes 5-20

loading an alternate 4-33

mode, entering EXEC commands 4-21

overview 4-23

reloading a failed configuration 4-36

submodes 4-20

target configuration

loading from a file 4-33

saving to a file 4-33

templates

applying 6-15

creating 6-13

configurations

multishelf systems 1-2

standalone router 1-1

configure command 4-25

configure exclusive command 4-26

Console port

connection 1-10, 4-3

DRP PLIM illustration 4-5

PRP-2 illustration 1-12, 4-6

RP for 16-slot LCC illustration 1-10, 4-3

RP for 4-slot and 8-slot LCCs, illustration 1-11, 4-4

control Ethernet network

single-FCC system illustration 3-9

controllers fabric plane command 3-31

correlation, alarm logging 5-13

CPU0 module 4-12

Craft Works Interface See CWI

CRS-FCC-LED card See OIM LED

Ctrl-Z command 4-38

cursor movement 6-19

CWI, introduction 1-6

D

debug command 7-5, 7-6

debugging

disabling for all services, all sessions 7-7

disabling for all services, one session 7-7

disabling for a service 7-7

displaying features 7-5

displaying status 7-6

enabling 7-6

default SDR 4-1

designated shelf controller

See DSC

domain name, configuration 5-1

domain name command 5-2

domain name server, configuration 5-1

domain name-server command 5-2

DSC

illustrated in rack 0 3-4

selection and identification 1-7

dsc serial command 3-29, 3-30

E

end command 4-38

errors

syntax 6-5

Ethernet interface

configuring 4-39

displaying 4-41

DRP PLIM illustration 4-5

PRP-2 illustration 1-12, 4-6

RP for 16-slot LCC illustration 1-10, 4-3

RP for 4-slot and 8-slot LCCs, illustration 1-11, 4-4

EXEC commands, entering in configuration modes 4-21

EXEC mode 4-19

exit command 4-37, 4-38

expressions

complex A-3

regular A-1

extensible markup language See XML

F

FCC serial number

physical location 3-6

file, redirecting output to 6-8

filters, command output 6-8

flash disk

configuration file storage 4-36

G

GBIC transceiver module 3-10

Gigabit Interface Converter (GBIC) transceiver module 3-10

global configuration mode 4-20

group command 5-18

H

halting command output 6-8

hardware

documentation xii

history, commands 6-17, 6-18

hostname

configuration 4-38

displayed in prompt 4-12

hostname command 4-39

host services and applications

domain services

domain name-server command 5-2

HTTP server configuration 5-4

I

Integrated switch 3-20

interface configuration mode 4-20

interface MgmtEth command 4-42

interfaces, verifying operation 7-13

intra-rack switch 3-21

ipv4 access-list maximum ace threshold command 5-27

ipv4 access-list maximum acl threshold command 5-27

ipv4 address command 4-42

ipv6 access-list maximum ace threshold command 5-27

ipv6 access-list maximum acl threshold command 5-27

IS-IS, configuration limits 5-20

K

keyboard shortcuts

capitalization 6-19

command history 6-18

cursor movement 6-19

deleting text 6-20

recalling deleted entries 6-18

transposing letters 6-20

L

LCC serial number

physical location 3-7

licensing 5-19

line wrap, editing long lines 6-5

load command 4-33

load commit changes command 5-10

load configuration failed commit command 4-37

load rollback changes command 5-11

logging

alarm correlation 5-13

configuration 5-13

output locations 5-12

severity levels 5-12

logging buffered command 5-12, 5-14

logging command 5-13

logging console command 5-12, 5-14

logging console disable command 5-15

logging monitor command 5-12

logging trap command 5-12, 5-13

log in, router 4-11

long lines, editing 6-5

low memory warning, removing configurations 7-11

M

Management Ethernet interface

configuring 4-39

displaying 4-41

DRP PLIM illustration 4-5

establishing a connection through 4-10

name syntax 4-39

PRP-2 illustration 4-6

RP for 16-slot LCC illustration 4-3

RP for 4-slot and 8-slot LCCs, illustration 4-4

maximum external-sa command 5-26

maximum group-mappings autorp command 5-27

maximum groups command

IGMP configuration mode 5-26

IGMP interface mode 5-26

maximum interfaces command 5-21

maximum path ipv4 command 5-20

maximum path ipv6 command 5-20

maximum paths command

OSPF 5-21

maximum-paths command

BGP 5-24

IS-IS 5-20

maximum paths command, OSPF 5-21

maximum peer-external-sa command 5-26

maximum-prefix command 5-23

maximum-redistributed-prefixes command (IS-IS) 5-20

maximum redistributed-prefixes command (OSPF) 5-21

maximum register-states command 5-27

maximum route-interfaces command 5-27

maximum routes command 5-26

memory

displaying system memory 7-10

low memory warnings 7-9

management 5-19

removing configurations 7-11

mode

administration configuration 4-19

administration EXEC 4-19

configuration submodes 4-20

EXEC 4-19

global configuration 4-20

interface configuration 4-20

ROM monitor 4-21

router configuration 4-20

router submode configuration 4-21

modem connection

DRP PLIM illustration 4-5

PRP-2 illustration 1-12, 4-6

RP for 16-slot LCC illustration 1-10, 4-3

RP for 4-slot and 8-slot LCCs, illustration 1-11, 4-4

module

number displayed in prompt 4-12

More prompt 6-7

MPLS

configuration limits 5-27

mpls traffic-eng maximum tunnels command 5-27

multicast, configuration limits 5-26

multishelf system 3-21

cableing scheme 3-20

four-FCC system illustration 1-5

hardware requirements 3-2

intra-rack switch 3-21

network topology 3-23

overview 1-2

restrictions 3-2

single-FCC system illustration 1-3

software requirements 2-1, 3-2

two-FCC system illustration 1-4

N

name, router

configuring 4-38

displayed in prompt 4-12

named SDR 4-1

netadmin user group 4-14

network connection, overview 4-3

no, command form 6-5

no debug command 7-7

O

oim count command 3-31

oim instance command 3-31

OIM LED card

illustration 3-45

LED interpretation 3-46

operator user group 4-14

Optical Interface Module. See OIM

OSPF, configuration limits 5-21

owner SDR 4-1

P

partial command, entry 6-4

password command 5-18

pattern

alternation A-4

multiple-character A-3

recall A-5

ping command 7-4

Primary LED

RP for 16-slot LCC illustration 1-10, 4-3

RP for 4-slot and 8-slot LCCs, illustration 1-11, 4-4

prompt

command mode identification 4-18

PRP-1, not supported 1-10

PRP-2, connections 1-10

R

rack number

displayed in prompt 4-12

four-FCC system plan 3-5

preparing a plan 3-3

single-FCC system plan 3-4

two-FCC system plan 3-5

redirecting command output 6-8

resource management 5-19

rollback

configuration

loading changes to the target configuration 5-10

overview 5-6

previewing changes 5-8

procedure 5-8

rollback failure 5-6

packages

package incompatibility 5-6

rollback configuration command 5-9

ROM monitor mode 4-21

root command 4-37

root-lr user group 4-14

root-system user group 4-14

route processors

DRP PLIM illustration 4-5

PRP-2 illustration 1-12, 4-6

RP for 16-slot LCC illustration 1-10, 4-3

RP for 4-slot and 8-slot LCCs, illustration 1-11, 4-4

router

clock setting 4-44

name configuration 4-38

name displayed in prompt 4-12

verification

Catalyst switch 3-18

fabric cabling 3-44

FCC 3-34

non-DSC LCC 3-38

spanning tree 3-39

standalone router 2-4

router configuration mode 4-20

router static address family ipv4 command 4-42

router submode configuration 4-21

RPL, configuration limits 5-25

rpl maximum lines command 5-25

rpl maximum policies command 5-25

S

save configuration command 4-33

SCGE 3-20

SDR

introduction 4-1

logging in 4-11

named 4-1

owner 4-1

secret command 5-18

secure domain router

See SDR

serial number

FCC location 3-6

LCC location 3-7

session

configuration overview 4-23

ending 4-38

shelf controller Gigabit Ethernet (SCGE) card 3-20

shortcuts

capitalization 6-19

command history 6-18

cursor movement 6-19

deleting text 6-20

recalling deleted entries 6-18

transposing letters 6-20

show aaa userdb command 5-16

show aaa usergroup command 4-16, 5-16

show bgp neighbor command 5-23

show clock command 4-45

show configuration command 4-30, 4-31, 4-33, 6-6, 7-2

show configuration commit changes ? command 5-7

show configuration commit changes command 5-7, 7-12

show configuration commit list 7-12

show configuration commit list command 5-7, 7-12

show configuration failed command 4-32, 7-8

show configuration failed load command 4-32

show configuration failed noerror command 4-32, 7-8

show configuration failed startup command 7-9

show configuration merge command 4-31

show configuration rollback changes command 5-8

show configuration sessions command 4-24, 7-13

show context command 7-2

show controller command 7-2

show controllers command 7-2

show controllers fabric connectivity command 3-36, 3-39

show controllers fabric plane command 3-35, 3-38

show controllers fabric rack command 3-35, 3-38

show debug command 7-2, 7-6

show debug conditions command 7-7

show environment command 2-6, 6-7, 7-2

show exception command 7-2, 7-3

show history 6-17

show hosts command 5-2, 5-3

show igmp summary command 5-26

show install command 7-3

show interfaces brief command 4-41

show interfaces command 7-3, 7-13

show interfaces MgmtEth command 4-43

show ipv4 access-lists command 5-27

show ipv4 interface brief command 7-13

show ipv4 interface command 7-13

show ipv6 access-lists command 5-27

show ipv6 interface brief command 7-13

show ipv6 interface command 7-13

show isis adjacency command 5-20

show isis route command 5-20

show logging command 5-14, 7-3

show memory command 7-3, 7-10

show memory summary command 7-10, 7-12

show mpls traffic-eng maximum tunnels command 5-27

show msdp summary command 5-26

show ospf command 5-21

show pim summary command 5-26

show platform command 2-7

show processes blocked command 7-3

show redundancy command 2-8, 7-3

show rpl maximum lines command 5-25

show rpl maximum policies command 5-25

show running-config command 4-27, 4-28, 6-6, 7-3

show running-config router ospf command 5-21

show running-config router static command 5-20

show running-config sanitized command 4-29, 4-30

show task supported command 4-13, 5-16

show tech-support command 6-7, 7-3

show user command 4-15, 7-3

show user group command 4-16

show user tasks command 4-15

show variables boot command 7-2

show version command 2-5, 6-6, 7-3

Simple Network Management Protocol 1-7

slot number

displayed in prompt 4-12

SNMP (Simple Network Management Protocol) 1-7

software, documentation xii

software entitlement 5-19

software packages

configuration rollback failure 5-6

spanning tree, verification 3-39

special characters A-2

ssh server command 4-10

standalone router

bring up 2-2

supported hardware 1-1

supported systems 1-1

verification after bring up 2-4

start up

multishelf system, first time 3-3

standalone router, first time 2-2

verification

Catalyst switch 3-18

fabric cabling 3-44

FCC 3-34

non-DSC LCC 3-38

spanning tree 3-39

standalone router 2-4

static route, configuration limits 5-20

Status LED

RP for 16-slot LCC illustration 1-10, 4-3

RP for 4-slot and 8-slot LCCs, illustration 1-11, 4-4

status LEDs

CRS-FCC-LED 3-44, 3-46

OIM LED 3-44, 3-46

stopping command output 6-8

submodes, configuration 4-20

switch

inter-rack 3-21

intra-rack 3-21

syntax

anchor characters A-4

character pattern ranges A-2

complex regular expressions A-3

error identification 6-5

pattern alternation A-4

pattern recall A-5

regular expressions A-1

special characters A-2

wildcard underscore A-4

sysadmin user group 4-14

system controller card 3-20

T

tab key 6-4

target configuration

clearing changes 4-34

loading from a file 4-33

saving to a file 4-33

task group, introduction 4-13

task ID

displaying 4-14

introduction 4-13

telnet ipv4 server command 4-10

telnet ipv6 server command 4-10

telnet server command 5-5

Telnet server configuration 5-4

templates

applying 6-15

creating 6-13

terminal connection

DRP PLIM illustration 4-5

PRP-2 illustration 1-12, 4-6

RP for 16-slot LCC illustration 1-10, 4-3

RP for 4-slot and 8-slot LCCs, illustration 1-11, 4-4

terminal server, establishing a connection through 4-8

terminal settings, default values 1-13, 4-7, 4-9

time, setting the router clock 4-44

time zone, setting the router clock 4-44

traceroute command 7-4

troubleshooting

basic commands 7-2

displaying system memory information 7-10

errors at startup 7-9

failed commit operation 7-8

low memory warnings 7-9

type, card type displayed in prompt 4-12

U

undebug all command 7-7

underscore wildcard character A-4

user access

task IDs, displaying 4-14

user accounts

configuration overview 5-16

creating 5-17

user groups

assigning to a user 5-17

displaying 4-14

introduction 4-13

predefined 4-14

user interfaces

CLI 1-6

CWI 1-6

SNMP 1-7

XML API 1-6

username command 5-18

W

warning, low memory 7-9

wildcards 6-12

X

XML

API 1-6

host service configuration 5-4