Cisco TelePresence Readiness Assessment Manager

Table Of Contents

Release Notes for Cisco TelePresence Readiness Assessment Manager 1.0

Product Documentation

Known Problems

Informational Notes

Documentation Errata

Obtaining Documentation and Submitting a Service Request

Release Notes for Cisco TelePresence Readiness Assessment Manager 1.0

---

Revised: Nov 28, 2007, OL-14689-01

These release notes contain the following sections:

•Product Documentation

•Known Problems

•Informational Notes,

•Documentation Errata

•Obtaining Documentation and Submitting a Service Request

Product Documentation

---

Note The documentation on the site from which you downloaded the product is the most up-to-date.

---

Table 1 describes the product documentation that is available.

Table 1 Product Documentation 

Document Title	Location
Release Notes for Cisco TelePresence Readiness Assessment Manager 1.0	•In PDF on the product CD-ROM •On Cisco.com at the following URL: http://www.cisco.com/en/US/products/ps8542/prod_release_notes_list.html
Quick Start Guide for Cisco TelePresence Readiness Assessment Manager 1.0	•In PDF on the product CD-ROM •On Cisco.com at the following URL: http://www.cisco.com/en/US/products/ps8542/prod_installation_guides_list.html
User Guide for Cisco TelePresence Readiness Assessment Manager 1.0	•In PDF on the product CD-ROM •On Cisco.com at the following URL: http://www.cisco.com/en/US/products/ps8542/products_user_guide_list.html
Deployment Guide for Cisco TelePresence Readiness Assessment Manager 1.0	On Cisco.com at the following URL: http://www.cisco.com/en/US/products/ps8542/products_installation_and_configuration_guides_list.html

Known Problems

There were no known problems at the time this document was created.

Informational Notes

•If Cisco TelePresence Readiness Assessment Manager is idle for a few hours, it prompts you to enter a username and password when you start to use it again. After you enter credentials, a "HTTP Status 404 - /ram/LiaisonServlet" error appears. Close the window and start Cisco TelePresence Readiness Assessment Manager again.

•A device is unsupported if it fails during inventory. The role for such a device is blank in the device classification table (select Inventory > Device Classification.)

---

Note A device also fails during inventory if it is unreachable and is likewise displayed with a blank role in the device classification table.

---

Documentation Errata

The Documentation Guide for Cisco TelePresence Readiness Assessment Manager 1.0 contains a URL location for a device support table. A device support table is not needed because Cisco TelePresence Readiness Assessment Manager creates a device inventory report that lists any unsupported devices.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

This document is to be used in conjunction with the documents listed in the "Product Documentation" section.

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007 Cisco Systems, Inc. All rights reserved.