Table Of Contents
3.2 TL1 Commands by Card (ONS 15454)
3.3 TL1 Commands by Card (ONS 15327)
3.4.2 ALW-MSG-ALL: Allow Message All
3.4.3 ALW-MSG-DBCHG: Allow Database Change Message
3.4.4 ALW-MSG-SECU: Allow Message Security
3.4.5 ALW-PMREPT-ALL: Allow Performance Report All
3.4.6 ALW-SWDX-EQPT: Allow Switch Duplex Equipment
3.4.7 ALW-SWTOPROTN-EQPT: Allow Switch to Protection Equipment
3.4.8 ALW-SWTOWKG-EQPT: Allow Switch to Working Equipment
3.4.14 COPY-IOSCFG: Copy IOS Config File
3.4.16 DISC-TACC: Disconnect Test Access
3.4.19 DLT-CRS-VT1: Delete Virtual Tributary Cross Connect
3.4.20 DLT-EQPT: Delete Equipment
3.4.21 DLT-FFP-<OCN_TYPE>: Delete Facility Protection Group (OC3, OC12, OC48, OC192)
3.4.22 DLT-FFP-CLNT: Delete Facility Protection Group Client
3.4.23 DLT-UCP-CC: Delete Unified Control Plane Control Channel
3.4.24 DLT-UCP-IF: Delete Unified Control Plane Interface
3.4.25 DLT-UCP-NBR: Delete Unified Control Plane Neighbor
3.4.26 DLT-USER-SECU: Delete User Security
3.4.27 ED-<OCN_TYPE>: Edit (OC3, OC12, OC48, OC192)
3.4.28 ED-<STS_PATH>: Edit (STS1, STS3C, STS6C, STS9C, STS12C, STS24C, STS48C, STS192C)
3.4.29 ED-BITS: Edit Building Integrated Timing Supply
3.4.30 ED-BLSR: Edit Bidirectional Line Switched Ring
3.4.32 ED-CRS-<STS_PATH>:ED CRS (STS1, STS3C, STS6C, STS9C, STS12C, STS24C, STS 48C, STS192C)
3.4.33 ED-CRS-VT1: Edit Cross Connection VT1
3.4.34 ED-DAT: Edit Date and Time
3.4.36 ED-DWDM: Edit Dense Wavelength Division Multiplexing
3.4.37 ED-EC1: Edit Electrical Carrier
3.4.38 ED-EQPT: Edit Equipment
3.4.39 ED-FFP-<OCN_TYPE>: Edit Facility Protection Group (OC3, OC12, OC48, OC192)
3.4.40 ED-FFP-CLNT: Edit Facility Protection Group Client
3.4.42 ED-NE-GEN: Edit Network Element General
3.4.43 ED-NE-SYNCN: Edit Network Element Synchronization
3.4.44 ED-OCH: Edit Optical Channel
3.4.46 ED-SYNCN: Edit Synchronization
3.4.49 ED-TRC-CLNT: Edit Trace Client
3.4.50 ED-TRC-OCH: Edit Trace Optical Channel Facilities
3.4.51 ED-UCP-CC: Edit Unified Control Plane Control Channel
3.4.52 ED-UCP-IF: Edit Unified Control Plane Interface
3.4.53 ED-UCP-NBR: Edit Unified Control Plane Neighbor
3.4.54 ED-UCP-NODE: Edit Unified Control Plane Node
3.4.55 ED-USER-SECU: Edit User Security
3.4.56 ED-VT1: Edit Virtual Tributary
3.4.59 ENT-CRS-VT1: Enter STS Cross Connection VT1
3.4.60 ENT-EQPT: Enter Equipment
3.4.61 ENT-FFP-<OCN_TYPE>: Enter Facility Protection Group (OC3, OC12, OC48, OC192)
3.4.62 ENT-FFP-CLNT: Enter Facility Protection Group Client
3.4.63 ENT-UCP-CC: Enter Unified Control Plane Control Channel
3.4.64 ENT-UCP-IF: Enter Unified Control Plane Interface
3.4.65 ENT-UCP-NBR: Enter Unified Control Plane Neighbor
3.4.66 ENT-USER-SECU: Enter User Security
3.4.67 EX-SW-<OCN_BLSR>: Operate Protection Switch (OC12, OC48, OC192)
3.4.68 INH-MSG-ALL: Inhibit Message All
3.4.69 INH-MSG-DBCHG: Inhibit Database Change Message
3.4.70 INH-MSG-SECU: Inhibit Message Security
3.4.71 INH-PMREPT-ALL: Inhibit Performance Report All
3.4.72 INH-SWDX-EQPT: Inhibit Switch Duplex Equipment
3.4.73 INH-SWTOPROTN-EQPT: Inhibit Switch to Protection Equipment
3.4.74 INH-SWTOWKG-EQPT: Inhibit Switch to Working Equipment
3.4.76 INIT-SYS: Initialize System
3.4.77 OPR-ACO-ALL: Operate Alarm Cutoff All
3.4.78 OPR-EXT-CONT: Operate External Control
3.4.80 OPR-PROTNSW-<OCN_TYPE>: Operate Protection Switch (OC3, OC12, OC48, OC192)
3.4.82 OPR-PROTNSW-CLNT: Operate Protection Switch Client
3.4.83 OPR-PROTNSW-VT1: Operate Virtual Tributary Protection Switch VT1
3.4.84 OPR-SYNCNSW: Operate Synchronization Switch
3.4.86 REPT ALM BITS: Report Alarm Building Integrated Timing Supply
3.4.87 REPT ALM COM: Report Alarm COM
3.4.88 REPT ALM ENV: Report Alarm Environment
3.4.89 REPT ALM EQPT: Report Alarm Equipment
3.4.90 REPT ALM RING: Report Alarm Ring
3.4.91 REPT ALM SYNCN: Report Alarm Synchronization
3.4.92 REPT ALM UCP: Report Alarm Unified Control Plane
3.4.93 REPT DBCHG: Report Database Change Message
3.4.95 REPT EVT BITS: Report Event BITS
3.4.96 REPT EVT COM: Report Event COM
3.4.97 REPT EVT ENV: Report Event Environment
3.4.98 REPT EVT EQPT: Report Event Equipment
3.4.99 REPT EVT FXFR: Report Event Software Download
3.4.100 REPT EVT IOSCFG: Report Event IOS Config File
3.4.101 REPT EVT RING: Report Event Ring
3.4.102 REPT EVT SECU: Report Event Security
3.4.103 REPT EVT SESSION: Report Event Session
3.4.104 REPT EVT SYNCN: Report Event Synchronization
3.4.105 REPT EVT UCP: Report Event Unified Control Plane
3.4.107 REPT SW: Report Switch
3.4.108 RLS-EXT-CONT: Release External Control
3.4.110 RLS-PROTNSW-<OCN_TYPE>: Release Protection Switch (OC3, OC12, OC48, OC192)
3.4.112 RLS-PROTNSW-CLNT: Release Protection Switch Client
3.4.113 RLS-PROTNSW-VT1: Release Protection Switch VT1
3.4.114 RLS-SYNCNSW: Release Synchronization Switch
3.4.115 RMV-<MOD2_IO>: Remove (CLNT, DS1, EC1, G1000, OC12, OC192, OC3, OC48, OCH, T1, T3)
3.4.116 RST-<MOD2_IO>: Restore (CLNT, DS1, EC1, G1000, OC12, OC192, OC3, OC48, OCH, T1, T3)
3.4.117 RTRV-<OCN_TYPE>: Retrieve (OC3, OC12, OC48, OC192)
3.4.118 RTRV-<STS_PATH>: Retrieve (STS1, STS3C, STS6C, STS9C, STS12C, STS24C, STS48C, STS192C)
3.4.120 RTRV-ALM-ALL: Retrieve Alarm All
3.4.121 RTRV-ALM-BITS: Retrieve Alarm Building Integrated Timing Supply
3.4.122 RTRV-ALM-ENV: Retrieve Alarm Environment
3.4.123 RTRV-ALM-EQPT: Retrieve Alarm Equipment
3.4.124 RTRV-ALM-RING: Retrieve Alarm Ring
3.4.125 RTRV-ALM-SYNCN: Retrieve Alarm Synchronization
3.4.126 RTRV-ALM-UCP: Retrieve Alarm Unified Control Plane
3.4.127 RTRV-ATTR-CONT: Retrieve Attribute Control
3.4.128 RTRV-ATTR-ENV: Retrieve Attribute Environment
3.4.129 RTRV-BITS: Retrieve Building Integrated Timing Supply
3.4.130 RTRV-BLSR: Retrieve Bidirectional Line Switched Ring
3.4.131 RTRV-CLNT: Retrieve Client
3.4.133 RTRV-COND-ALL: Retrieve Condition All
3.4.134 RTRV-COND-BITS: Retrieve Condition Building Integrated Timing Supply
3.4.135 RTRV-COND-ENV: Retrieve Environmental Condition
3.4.136 RTRV-COND-EQPT: Retrieve Condition Equipment
3.4.137 RTRV-COND-RING: Retrieve Condition Ring
3.4.138 RTRV-COND-SYNCN: Retrieve Condition Synchronization
3.4.139 RTRV-COND-UCP: Retrieve Condition Unified Control Plane
3.4.140 RTRV-CRS: Retrieve Cross Connect
3.4.142 RTRV-CRS-VT1: Retrieve Cross Connect Virtual Tributary
3.4.143 RTRV-DS1: Retrieve DS1
3.4.144 RTRV-DWDM: Retrieve Dense Wavelength Division Multiplexing
3.4.145 RTRV-EC1: Retrieve EC1
3.4.146 RTRV-EQPT: Retrieve Equipment
3.4.147 RTRV-EXT-CONT: Retrieve External Control
3.4.148 RTRV-FFP-<OCN_TYPE>: Retrieve Facility Protection Group (OC3, OC12, OC48, OC192)
3.4.149 RTRV-FFP-CLNT: Retrieve Facility Protection Group Client
3.4.150 RTRV-FSTE: Retrieve Fast Ethernet
3.4.151 RTRV-G1000: Retrieve G1000 Facility
3.4.152 RTRV-GIGE: Retrieve Gigabit Ethernet
3.4.153 RTRV-HDR: Retrieve Header
3.4.154 RTRV-INV: Retrieve Inventory
3.4.155 RTRV-LOG: Retrieve Log
3.4.156 RTRV-MAP-NETWORK: Retrieve Map Network
3.4.157 RTRV-NE-GEN: Retrieve Network Element General
3.4.158 RTRV-NE-IPMAP: Retrieve Network Element IPMAP
3.4.159 RTRV-NE-SYNCN: Retrieve Network Element Synchronization
3.4.160 RTRV-OCH: Retrieve Optical Channel
3.4.164 RTRV-PMSCHED-ALL: Retrieve Performance Schedule All
3.4.165 RTRV-POS: Retrieve Packet Over SONET
3.4.166 RTRV-PROTNSW-<OCN_TYPE>: Retrieve Protection Switch (OC3, OC12, OC48, OC192)
3.4.168 RTRV-PROTNSW-CLNT: Retrieve Protection Switch Client
3.4.169 RTRV-PROTNSW-VT1: Retrieve Protection Switch VT1
3.4.171 RTRV-SYNCN: Retrieve Synchronization
3.4.172 RTRV-T1: Retrieve T1 Facility
3.4.174 RTRV-TACC: Retrieve Test Access
3.4.176 RTRV-TOD: Retrieve Time of Day
3.4.177 RTRV-TRC-<OCN_BLSR>: Retrieve Trace Client (OC12, OC192, OC48)
3.4.178 RTRV-TRC-CLNT: Retrieve Trace Client
3.4.179 RTRV-TRC-OCH: Retrieve Trace Optical Channel
3.4.180 RTRV-UCP-CC: Retrieve Unified Control Plane Control Channel
3.4.181 RTRV-UCP-IF: Retrieve Unified Control Plane Interface
3.4.182 RTRV-UCP-NBR: Retrieve Unified Control Plane Neighbor
3.4.183 RTRV-UCP-NODE: Retrieve Unified Control Plane Node
3.4.184 RTRV-USER-SECU: Retrieve User Security
3.4.185 RTRV-VT1: Retrieve VT1
3.4.187 SET-ATTR-CONT: Set Attribute Control
3.4.188 SET-ATTR-ENV: Set Attribute Environment
3.4.191 SET-TOD: Set Time of Day
3.4.192 SW-DX-EQPT: Switch Duplex Equipment
3.4.193 SW-TOPROTN-EQPT: Switch to Protection Equipment
3.4.194 SW-TOWKG-EQPT: Switch to Working Equipment
TL1 Command Descriptions
Note
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
This chapter provides specific information on TL1 commands and autonomous messages for the Cisco ONS 15454 and the Cisco ONS 15327, Release 4.0, including:
•
TL1 commands by category
•
TL1 commands by card
•
TL1 commands
For information on command components, such as parameters, see "TL1 Command Components."
3.1 TL1 Commands by Category
3.2 TL1 Commands by Card (ONS 15454)

