This guide lists TL1 commands and autonomous messages by category. It includes basic descriptions and input and output formats supported by the Cisco ONS 15454 SDH, Release 6.0. Refer to the Cisco ONS 15454 SDH TL1 Command Guide for a complete description of TL1 commands.
TL1 commands conform to the following syntax: a:b:c:d:e: ...z; where: "a" is the Command Code "b" is the Target Identifier (TID) "c" is the Access Identifier (AID) or the User Identifier (UID) "d" is the Correlation Tag (CTAG) "e: ...z;" are other positions required for various commands The TID, AID, and CTAG route and control the TL1 command. Other parameters provide additional information required to complete the action requested by the command.
1 MS-SPRing
Table 1 MS-SPRing
DLT-<MOD_RING>:[<TID>]:<AID>:<CTAG>[:::];
Deletes the multiplex section-shared protection ring (MS-SPRing) of the NE.
Exercises the algorithm for switching from a working facility to a protection facility without actually performed a switch.
RTRV-<MOD_RING>:[<TID>]:[<AID>]:<CTAG>[::::];
Retrieves all of the MS-SPRing information of the network element (NE).
Output format:
SID DATE TIME M CTAG COMPLD "[<AID>]::[RINGID=<RINGID>],[NODEID=<NODEID>],[MODE=<MODE>], [RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],[SRVTM=<SRVTM>], [EASTWORK=<EASTWORK>],[WESTWORK=<WESTWORK>],[EASTPROT=<EASTPROT>], [WESTPROT=<WESTPROT>]" ;
RTRV-TRC-<STM_MSSPR>:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the valid J1 expected trace string, received trace string, trace mode, c2 byte, VC bandwidth of the STM port only if the port has MS-SPring.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LEVEL=<LEVEL>],[EXPTRC=<EXPTRC>],[INCTRC=<INCTRC>], [TRCMODE=<TRCMODE>],[C2=<C2>]"
Permit the NE's APC application to force regulation of the optical power to the DWDM ring.
OPR-LASER-OTS:[<TID>]:<AID>:<CTAG>;
Instructs a laser to be switched on.
OPR-LNK:[<TID>]::<CTAG>;
Permits the NE's optical link (OLNK) application to calculate all automatic optical links between points that can be univocally identified by the NE.
OPR-PROTNSW-OCH:[<TID>]:<AID>:<CTAG>::<SW>;
Performs a protection switch on the trunk port of a TXPP_MR_2.5G transponder (protect version only).
OPR-SLV-WDMANS:[<TID>]:<AID>:<CTAG>;
Invokes the calculation of the expected span loss verification.
OPR-WDMANS:[<TID>]::<CTAG>;
Permits the NE's AONS application to force a recompute of the value assigned to all variable optical attenuators (VOAs) representing the optical path inside the node.
Retrieves the configuration parameter of a DWDM client.
Output format:
SID DATE TIME M CTAG COMPLD "<AIDUNIONID>,<AIDTYPE>:,,[<ROLE>],[<STATUS>]:[NAME=<NAME>],[LBCL=<LBCL>], [OPT=<OPT>],[OPR=<OPR>],[FREQ=<FREQ>],[LOSSB=<LOSSB>]:<PSTPSTQ>,[<SST>]" ;
Retrieves any optical link associated with the entered AID(s) or AID range.
Output format:
SID DATE TIME M CTAG COMPLD "<FROM>,<TO>::[OLNKT=<OPTICALLINKTYPE>],[CTYPE=<CREATIONTYPE>], [RDIRN=<RDIRN>],[BAND=<BAND>],[WLEN=<WLEN>]:<PST_PSTQ>,[<SST>]" ;
RTRV-NE-APC:[<TID>]:[<AID>]:<CTAG>;
Retrieves the NE's APC application ports involved in node setup regulation.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<MOD>::[MODIFDAT=<MODIFDAT>],[MODIFTM=<MODIFTM>], [CHECKDAT=<CHECKDAT>],[CHECKTM=<CHECKTM>]" ;
RTRV-NE-WDMANS:[<TID>]:[<AID>]:<CTAG>;
Retrieves the NE's optical node setup (WDMANS) application ports involved in node setup regulation.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<AIDTYPE>::[REGULATED=<REGULATED>],[PARAM=<PARAM>]"
;
RTRV-OCH:[<TID>]:<AID>:<CTAG>;
Retrieves the attributes (that is, service parameters) and state of an OCH facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:[RDIRN=<RDIRN>],[OPTYPE=<OPTICALPORTTYPE>], [OPWR=<POWER>],[EXPWLEN=<EXPWLEN>],[ACTWLEN=<ACTWLEN>], [ILOSS=<ILOSS>],[VOAMODE=<VOAMODE>],[VOAATTN=<VOAATTN>], [VOAPWR=<VOAPWR>],[VOAREFATTN=<VOAREFATTN>], [VOAREFPWR=<VOAREFPWR>],[REFOPWR=<REFOPWR>],[CALOPWR=<CALOPWR>], [CHPOWER=<CHPOWER>],[NAME=<PORTNAME>],[SFBER=<SFBER>],[SDBER=<SDBER>], [COMM=<COMM>],[GCCRATE=<GCCRATE>],[DWRAP=<DWRAP>],[FEC=<FEC>], [PAYLOADMAP=<PAYLOADMAP>],[OSFBER=<OSFBER>],[OSDBER=<OSDBER>], [MACADDR=<MACADDR>],[SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>], [SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[OSPF=<OSPF>],[LBCL=<LBCL>], [OPT=<OPT>],[OPR=<OPR>]:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-OMS:[<TID>]:<AID>:<CTAG>;
Retrieves the attributes (that is, service parameters) and state of an OMS facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::RDIRN=<RDIRN>,OPTYPE=<OPTICALPORTTYPE>,[OPWR=<POWER>], EXPBAND=<EXPBAND>,[ACTBAND=<ACTBAND>],[ILOSS=<ILOSS>], [VOAMODE=<VOAMODE>],[VOAATTN=<VOAATTN>],[VOAPWR=<VOAPWR>], [VOAREFATTN=<VOAREFATTN>],[VOAREFPWR=<VOAREFPWR>], [REFOPWR=<REFOPWR>],[CALOPWR=<CALOPWR>],[CHPOWER=<CHPOWER>], [NAME=<NAME>]:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-OPM:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the optical power monitoring parameters present at the OCH layer in a reconfigurable optical add/drop multiplexing (ROADM) node.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[POWEROUT=<POWEROUT>],[POWERADD=<POWERADD>], [POWERPT=<POWERPT>]" ;
RTRV-OSC:[<TID>]:<AID>:<CTAG>;
Retrieves all OSC information of the NE.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[RINGID=<RINGID>],[NODEID=<NODEID>],[EAST=<EAST>],[WEST=<WEST>]" ;
RTRV-OTS:[<TID>]:<AID>:<CTAG>;
Retrieves the attributes (that is, service parameters) and state of an OTS facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:RDIRN=<RDIRN>,OPTYPE=<OPTICALPORTTYPE>,[OPWR=<POWER>], [ILOSS=<ILOSS>],[VOAMODE=<VOAMODE>],[VOAATTN=<VOAATTN>], [VOAPWR=<VOAPWR>],[VOAREFATTN=<VOAREFATTN>], [VOAREFPWR=<VOAREFPWR>],[OSRI=<OSRI>],[AMPLMODE=<AMPLMODE>], [CHPOWER=<CHPOWER>],[GAIN=<GAIN>],[EXPGAIN=<EXPGAIN>], [REFOPWR=<REFOPWR>],[OFFSET=<OFFSET>],[REFTILT=<REFTILT>], [CALTILT=<CALTILT>],[ASEOPWR=<ASEOPWR>],[DCULOSS=<DCULOSS>], [AWGST=<AWGST>],[HEATST=<HEATST>],[NAME=<NAME>]:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-PROTNSW-OCH:[<TID>]:<AID>:<CTAG>;
Retrieves the protection switch status of a TXPP_MR_2.5G transponder trunk port (protect version only).
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<SW>,<SWTYPE>" ;
RTRV-SLV-WDMANS:[<TID>]:<AID>:<CTAG>;
Retrieves the options provisionable by the ED-SLV-WDMASN command.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[HIGHSLVEXP=<HIGHSLVEXP>],[LOWSLVEXP=<LOWSLVEXP>], [SLVACT=<SLVACT>],[RESOLUTION=<RESOLUTION>]" ;
SID DATE TIME M CTAG COMPLD "<CHANNEL>,<MOD>::[TRCLEVEL=<TRCLEVEL>],[EXPTRC=<EXPTRC>], [TRC=<TRC>],[INCTRC=<INCTRC>],[TRCMODE=<TRCMODE>], [TRCFORMAT=<TRCFORMAT>]" ;
RTRV-WDMANS:[<TID>]:<AID>:<CTAG>;
Retrieves the AONS application attributes.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[POWERIN=<POWERIN>],[POWEROUT=<POWEROUT>], [POWEREXP=<POWEREXP>],[NTWTYPE=<NTWTYPE>], [OPTICALTYPE=<OPTICALTYPE>],[LASTRUNDAT=<LASTRUNDAT>], [LASTRUNTM=<LASTRUNTM>]" ;
RTRV-WLEN:[<TID>]:<AID>:<CTAG>;
Retrieves the WLEN provisioning information.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<CCT>:[SIZE=<SIZE>],[CKTID=<CKTID>]:<PST_PSTQ>,[<SSTQ>]" ;
Sets the alarm thresholds on the following cards/ports/channels: MXP_2.5G_10G/TXP_MR_10G, optical service channel, optical amplifier, dispersion compensation units, multiplex/demultiplex and OADM.
5 Environment
Table 5 Environment
OPR-ACO-ALL:[<TID>]::<CTAG>;
Operates the cut-off of the office audible alarm indications without changing the local alarm indications.
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],[<OCRDAT>], [<OCRTM>],,,[<DESC>]" ;
RTRV-EQPT:[<TID>]:<AID>:<CTAG>[::::];
Retrieves protection group information and status information for all cards.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<AIDTYPE>,<EQUIP>,[<ROLE>],[<STATUS>]:[PROTID=<PROTID>], [PRTYPE=<PRTYPE>],[RVRTV=<RVRTV>],[RVTM=<RVTM>], [CARDNAME=<CARDNAME>],[IOSCFG=<IOSCFG>],[CARDMODE=<CARDMODE>], [PEERID=<PEERID>],[REGENNAME=<REGENNAME>],[PWL=<PWL>], [TRANSMODE=<TRANSMODE>],[RETIME=<RETIME>]:[<PST_PSTQ>],[<SSTQ>]" ;
Downloads a new software package from the location specified by the FTP URL).
REPT EVT FXFR
Reports the FTP software download status of the start, completion and completed percentage.
Output format:
SID DATE TIME A ATAG REPT EVT FXFR "<FILENAME>,<FXFR_STATUS>,[<FXFR_RSLT>],[<PRCNT_XFRD>]" ;
REPT EVT IOSCFG
Reports the status of copying the IOS configuration file, when the COPY-IOSCFG command is issued.
Output format:
SID DATE TIME A ATAG REPT EVT IOSCFG "<AID>:<SRC>,<DEST>,<STATUS>,[<RESULT>]" ;
10 Log
Table 10 Log
ALW-MSG-DBCHG:[<TID>]::<CTAG>[::,,];
Enables REPT DBCHG.
INH-MSG-DBCHG:[<TID>]::<CTAG>[::,,];
Disables REPT DBCHG.
REPT DBCHG
Reports any changes on the NE that result from certain TL1 commands or an external event.
Output format:
SID DATE TIME A ATAG REPT DBCHG "TIME=<TIME>,DATE=<DATE>,[SOURCE=<SOURCE>],[USERID=<USERID>], DBCHGSEQ=<DBCHGSEQ>:<COMMAND>:<AID>:::<PSTPSTQ>,<SST>" ;
RTRV-AUDIT-LOG:[<TID>]::<CTAG>;
Retrieves the contents of the audit log stored in the NE.
Output format:
SID DATE TIME M CTAG COMPLD "<ENTRYNUM>,<OCRDAT>,<OCRTM>,<TASKID>,<TXSTATUS>,<DESCRIPTION>"
;
RTRV-LOG:[<TID>]::<CTAG>::<LOGNM>;
Retrieves the alarm log of the NE.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<ALMNUMBER>:CURRENT=<CURRENT>,[PREVIOUS=<PREVIOUS>], <CONDITION>,<SRVEFF>,[TIME=<OCRTIME>],[DATE=<OCRDAT>]:<ALMDESCR>" ;
11 Network
Table 11 Network
RTRV-MAP-NETWORK:[<TID>]::<CTAG>;
Reports all the NE attributes that are reachable from the gateway NE (GNE).
RTRV-NE-IPMAP:[<TID>]:[<AID>]:<CTAG>;
Retrieves the IP address and node name of the NEs that have the data communications channel (DCC) connection with this NE.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<IPADDR>,<NODENAME>" ;
Retrieves the attributes associated with an SDH high/low order path.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LEVEL=<LEVEL>],[SFBER=<SFBER>],[SDBER=<SDBER>],[RVRTV=<RVRTV>], [RVTM=<RVTM>],[SWPDIP=<SWPDIP>],[HOLDOFFTIMER=<HOLDOFFTIMER>], [EXPTRC=<EXPTRC>],[TRC=<TRC>],[INCTRC=<INCTRC>],[TRCMODE=<TRCMODE>], [TACC=<TACC>],[TAPTYPE=<TAPTYPE>],[SNCPPTHSTATE=<SNCPPTHSTATE>], [C2=<C>],[MSSPRPTHSTATE=<MSSPRPTHSTATE>]:<PSTPSTQ>,[<SSTQ>]" ;
13 Performance
Table 13 Performance
ALW-PMREPT-ALL:[<TID>]::<CTAG>;
Resumes the processing of all inhibited PM reports.
Schedules/reschedules the NE to report the performance monitoring data for a line facility or for an STM/VC path periodically, using an automatic REPT PM message.
Modifies the attributes and the state of the STM1E port facility.
ENT-<MOD1PAYLOAD>:[<TID>]:<AID>:<CTAG>[::::];
Creates the specified port.
OPR-ALS:[<TID>]:<AID>:<CTAG>[::::];
Restarts the laser of an STM facility.
RTRV-<MOD1FCPAYLOAD>:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the attributes related with the Fibre Channel (FC) port.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:LINKRATE=<LINKRATE>,LINKSTATE=<LINKSTATE>, [LINKRCVRY=<LINKRCVRY>],[DISTEXTN=<DISTEXTN>], [LINKCREDITS=<LINKCREDITS>],[MFS=<MFS>],[ENCAP=<ENCAP>],[NAME=<NAME>], [SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[FREQ=<FREQ>],[LOSSB=<LOSSB>]: <PST_PSTQ>,[<SST>]" ;
RTRV-<MOD1FICONPAYLOAD>:[<TID>]:<AID>:<CTAG>;
Returns Fibre Channel specific settings for ports that have been configured to carry FICON traffic using the ENT-FICON command.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[<ROLE>],[<STATUS>]:[LINKRATE=<LINKRATE>],[LINKSTATE=<LINKSTATE>], [LINKRCVRY=<LINKRCVRY>],[DISTEXTN=<DISTEXTN>], [LINKCREDITS=<LINKCREDITS>],[MFS=<MFS>],[ENCAP=<ENCAP>],[NAME=<NAME>], [SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[FREQ=<FREQ>],[LOSSB=<LOSSB>]: <PST_PSTQ>,<SST>" ;
Retrieves the attributes (that is, service parameters) and state of an STM facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:[DCC=<DCC>],[AREA=<AREA>],[TMGREF=<TMGREF>], [SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>],[PJMON=<PJMON>], [SFBER=<SFBER>],[SDBER=<SDBER>],[MODE=<MODE>],[WVLEN=<WVLEN>], [RINGID=<RINGID>],[MSSPRTYPE=<MSSPRTYPE>],[MUX=<MUX>],[UNIC=<UNIC>], [CCID=<CCID>],[NBRIX=<NBRIX>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>], [SSMRCV=<SSMRCV>],[OSPF=<OSPF>],[LDCC=<LDCC>],[NAME=<NAME>], [LBCL=<LBCL>],[OPT=<OPT>],[OPR=<OPR>],[EXPTRC=<EXPTRC>],[TRC=<TRC>], [TRCMODE=<TRCMODE>],[TRCFORMAT=<TRCFORMAT>],[ADMSSM=<ADMSSM>], [SENDDUSFF=<SENDDUSFF>],[AISONLPBK=<AISONLPBK>],[FREQ=<FREQ>], [LOSSB=<LOSSB>],[FOREIGNFEND=<FOREIGNFEND>], [FOREIGNIPADDRESS=<FOREIGNIPADDRESS>],:<PSTPSTQ>,[<SSTQ>]" ;
RTRV-10GIGE:[<TID>]:<AID>:<CTAG>[::::];
Used to retrieve the 10-Gbps-specific parameters for a port configured to support the gigabyte Ethernet payload using the ENT-10GIGE command.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[<ROLE>],[<STATUS>]:[NAME=<NAME>],[MACADDR=<MACADDR>], [LBCL=<LBCL>],[OPT=<OPT>],[OPR=<OPR>],[FREQ=<FREQ>],[LOSSB=<LOSSB>]: <PSTPSTQ>,[<SST>]" ;
RTRV-ALS:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the ALS attributes of an STM facility and in general for all facilities that support the ALS feature.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<AIDTYPE>::[ALSMODE=<ALSMODE>],[ALSRCINT=<ALSRCINT>], [ALSRCPW=<ALSRCPW>],[LSRSTAT=<LSRSTAT>]" ;
RTRV-DS3I:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the properties of a DS3i-N-12 facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::FMT=<FMT>,LINECDE=<LINECDE>,LBO=<LBO>,[INHFELPBK=<INHFELPBK>], [TACC=<TACC>],[TAPTYPE=<TAPTYPE>],[SFBER=<SFBER>],[SDBER=<SDBER>], [SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>],[NAME=<NAME>]:<PSTPSTQ>,[<SSTQ>" ;
RTRV-E1:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the attributes and state information of an E1 port facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::LINECDE=<LINECDE>,FMT=<FMT>,[TACC=<TACC>],[TAPTYPE=<TAPTYPE>], [SFBER=<SFBER>],[SDBER=<SDBER>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>], [NAME=<NAME>],[SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>], [RETIME=<RETIME>],[ADMSSM=<ADMSSM>],[PROVIDESYNC=<PROVIDESYNC>], [SABIT=<SABIT>]:<PSTPSTQ>,[<SSTQ>]" ;
RTRV-E3:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the attributes and state information of an E3 port facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[TACC=<TACC>],[TAPTYPE=<TAPTYPE>],[SFBER=<SFBER>], [SDBER=<SDBER>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>], [NAME=<NAME>]:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-E4:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the attributes and state information of an E4 port facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[PAYLOAD=<PAYLOAD>],[SFBER=<SFBER>],[SDBER=<SDBER>],[SOAK=<SOAK>], [SOAKLEFT=<SOAKLEFT>],[NAME=<NAME>]:<PSTPSTQ>,[<SSTQ>]" ;
RTRV-ESCON:[<TID>]:<AID>:<CTAG>;
Retrieves Fibre Channel specific settings for ports that have been configured to carry ESCON traffic using the ENT-ESCON command.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:[ENCAP=<ENCAP>]" ;
RTRV-FAC:[<TID>]:<SRC>:<CTAG>[::::];
Retrieves the payload type of the facility.
Output format:
SID DATE TIME M CTAG COMPLD "<SRC>::PAYLOAD=<PAYLOAD>:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-FSTE:[<TID>]:<AID>:<CTAG>;
Retrieves the front end port information of a Fast Ethernet (10/100 Mbps) card.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[ADMINSTATE=<ADMINSTATE>],[LINKSTATE=<LINKSTATE>],[MTU=<MTU>], [FLOWCTRL=<FLOWCTRL>],[DUPLEX=<DUPLEX>],[SPEED=<SPEED>],[FLOW=<FLOW>], [EXPDUPLEX=<EXPDUPLEX>],[EXPSPEED=<EXPSPEED>],[VLANCOS=<VLANCOS>], [IPTOS=<IPTOS>],[OPTICS=<OPTICS>],[NAME=<NAME>],[SOAK=<SOAK>], [SOAKLEFT=<SOAKLEFT>]:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-G1000:[<TID>]:<AID>:<CTAG>;
Retrieves the G1000 facilities configuration.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[MFS=<MFS>],[FLOW=<FLOW>],[LAN=<LAN>],[OPTICS=<OPTICS>], [TRANS=<TRANS>],[TPORT=<TPORT>],[LOWMRK=<LOWMRK>], [HIWMRK=<HIWMRK>],[AUTONEG=<AUTONEG>],[ENCAP=<ENCAP>], [NAME=<NAME>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>]:<PST_PSTQ>,[<SSTQ>]" ;
RTRV-GFP:[<TID>]:<SRC>:<CTAG>;
Retrieves GFP; used for GFP management.
Output format:
SID DATE TIME
M CTAG COMPLD "<AID>::[FCS=<FCS>],[AUTOTHGFPBUF=<AUTOTHGFPBUF>],[GFPBUF=<GFPBUF>], [FILTER=<FILTER>]" ;
RTRV-GIGE:[<TID>]:<AID>:<CTAG>;
Retrieves front end port information of a 1 Gigabit Ethernet card.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::<ROLE>,<STATUS>:[ADMINSTATE=<ADMINSTATE>], [LINKSTATE=<LINKSTATE>],[MTU=<MTU>],[ENCAP=<ENCAP>], [FLOWCTRL=<FLOWCTRL>],[OPTICS=<OPTICS>],[DUPLEX=<DUPLEX>], [SPEED=<SPEED>],[NAME=<NAME>],[FREQ=<FREQ>],[LOSSB=<LOSSB>]" ;
RTRV-POS:[<TID>]:<AID>:<CTAG>;
Retrieves the back-end port information for the Ethernet card, when the back-end port is working in POS mode.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[ADMINSTATE=<ADMINSTATE>],[LINKSTATE=<LINKSTATE>],[MTU=<MTU>], [ENCAP=<ENCAP>],[NAME=<NAME>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>]: <PST_PSTQ>,[<SST>]" ;
RTRV-STM1E:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the attributes and state information of an STM1E facility.
Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[PAYLOAD=<PAYLOAD>],[SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>], [SFBER=<SFBER>],[SDBER=<SDBER>],[SOAK=<SOAK>],[SOAKLEFT=<SOAKLEFT>], [NAME=<NAME>]:<PST_PSTQ>,[<SSTQ>" ;
Instructs an SDH NE to release (clear) an SDH line protection switch request.
RLS-PROTNSW-<PATH>:[<TID>]:<SRC>:<CTAG>[::];
Instructs an SDH NE to release (clear) an SDH path protection switch request that was established with the OPR-PROTNSW-(MOD_PATH) command.
RTRV-FFP:[<TID>]:<AID>:<CTAG>[::::];
Retrieves all optical 1+1 protection groups
Output format:
SID DATE TIME M CTAG COMPLD "<WORK>,<PROTECT>:<LEVEL>:[PROTID=<PROTID>],[RVRTV=<RVRTV>], [RVTM=<RVTM>],[PSDIRN=<PSDIRN>],[VRGRDTM=<VRGRDTM>], [DTGRDTM=<DTGRDTM>],[RCGRDTM=<RCGRDTM>],[OPOTYPE=<OPOTYPE>]" ;
RTRV-FFP-<STM_TYPE>:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the optical facility protection information.
Output format:
SID DATE TIME M CTAG COMPLD "<WORK>,<PROTECT>::[PROTID=<PROTID>,][RVRTV=<RVRTV>,][RVTM=<RVTM>,] [PSDIRN=<PSDIRN>,][VRGRDTM=<VRGRDTM>,][DTGRDTM=<DTGRDTM>,] [RCGRDTM=<RCGRDTM>,][OPOTYPE=<OPOTYPE>]" ;
