Table Of Contents
New and Changed Information
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco NX-OS Security Command Reference, Release 4.0 . The latest version of this document is available at the following Cisco website:http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_0/nx-os/security/command/reference/sec_cmd_ref.html
To check for additional information about Cisco NX-OS Release 4.0, see the Cisco NX-OS Release Notes available at the following Cisco website:http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_0/nx-os/release/notes/401_nx-os_release_note.html
The following table summarizes the new and changed features for the Cisco NX-OS Security Command Reference, Release 4.0 , and tells you where they are documented.
Table 1 New and Changed Information for Release 4.0
Feature
Change Description
Changed in Release
Where Documented
Default user roles for AAA authentication of remote users
Added the aaa user default-role and show aaa default-user role commands.
4.0(3)
A Commands Show Commands
Rate limits
Added the port-security key word to the clear hardware rate-limit , platform rate-limit , and clear hardware rate-limit commands.
4.0(3)
C Commands P Commands Show Commands
IPv6 packet policing in control plane class maps
Added IPv6 support to the match (class-map) command.
4.0(3)
M Commands
Password-strength checking
Added the password strength-check and show password strength-check commands.
4.0(3)
P Commands Show Commands
Cisco TrustSec
Added the propagate-sgt command.
4.0(3)
P Commands
Telnet for IPv6
Added the telnet6 command.
4.0(2)
T Commands
Control plane policing (CoPP) configuration status information
Added the show copp status command.
4.0(2)
Show Commands
