Table Of Contents
Call Detail Block File Fields
The BTS 10200 system stores the raw call detail blocks (CDBs) in a flat file ASCII based format on the persistent store associated with the Bulk Data Management System (BDMS) for retention purposes. The BTS 10200 stores a minimum of 10 megabytes of billing records in a circular file implementation. This data is subsequently sent to the specified remote accounting office or billing server or mediation device via the File Transfer Protocol (FTP).
The following section illustrates the format of each field in a Call Detail Block (CDB), the order in which it occurs, the possible values for the individual fields and the meaning of the data within the field where applicable.
The delimiters used to separate fields within a record or records within a file can be any one of the following:
•
semi-colon ";"
•
•
•
•
Note
The CDB field and record separators are defined in the platform.cfg file that is read at initialization time. The platform.cfg file associated with the BDMS platform must be updated for changes to take affect; however, the file cannot be changed without a system restart. Both active and standby BDMS platforms must be restarted to pick up any change of delimiters.
The [ProcessParameter] block to update is "ProcName=BMG." The parameter to update is "Args." To change the field delimiter you must update the "-FD" option. To change the record delimiter you must update the "-RD" option.
Caution
Table A-1 provides information detailing the information contained in the fields in the output files transmitted from the Element Management System (EMS) on the Cisco BTS 10200 Softswitch.
.
Table A-1 Call Detail Block Field Descriptions
Call Type
Numeric
0 = NULL
1 = TEST-CALL
2 = INTL
3 = LOCAL
4 = TOLL
5 = INTERLATA
6 = TANDEM
7 = EMG
8 = NON-EMG
9 = DA
10 = DA-TOLL
11 = REPAIR
12 = RELAY
13 = BUSINESS
14 = TOLL-FREE
15 = 900
16 = 500
17 = 700
18 = 976
19 = VACANT
20 = PCS
21 = INVALID
22 = NONE
23 = LRN
24 = EXTENSION
25 = CUT-THRU
26 = OPERATOR
27 = CARRIER-OPERATOR
28 = OPERATOR-ASSISTED
29 = BLV
30 = SPEED-DIAL
31 = NATIONAL
32= TW
33 = INFO
34 = PREMIUM
35 = ATTENDANT
36 = NAS
37 = POLICE
38 = FIRE
39 = AMBULANCE
40 = TIME
41 = WEATHER
42 = TRAFFIC
43 = LOOPBACK_TEST
44 = INTL_OPERATOR
45 = NATL_OPERATOR
46 = AIRLINES
47 = RAILWAYS
48 = SERVICE_CODE
49 = INTL_WORLD_ZONE_1
The nature of the call, which indicates the type of accounting processing to apply to it.
Signal Start Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1, 1970 0:00:00h.
Time starts on receipt of an MGCP NTFY or SS7 IAM. If the value is zero, timestamp is ignored
Signal Stop Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1, 1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
Time stops on the last of the following signaling events:
1) MGCP DLCX receipt
2) transmission/receipt of an RLC
3) transmission/receipt of last signaling message to/from a peer CMS/MGC.Interconnect Start Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
Time starts on commitment of bandwidth between the IP/ATM and PSTN networks.
Interconnect Stop Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
Time stops on release of bandwidth between the IP/ATM and PSTN networks.
Call Connect Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
Time starts on receipt of an MGCP NTFY indicating off-hook, or SS7 ANS, or answer indication from the media gateway for an operator services trunk.
Call Answer Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
Time starts on both parties being off-hook for at least 2 seconds.
Call Disconnect Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
Time starts on receipt of an MGCP NTFY indicating on-hook of the calling party, or expiration of the call-continuation timer, an SS7 REL, or an indication from the media gateway that the operator services trunk has disconnected.
Database Query Time1
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the first database query response was received for this call.
Service Instance Time1
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the instance of Service Type 1 occurred.
Service Instance Time2
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the instance of Service Type 2 occurred.
Service Instance Time3
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the instance of Service Type 3 occurred.
Service Activation Time1
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the activation of Service Type 1 occurred.
Service Activation Time2
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the activation of Service Type 2 occurred.
Service Activation Time3
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the activation of Service Type 3 occurred.
Service Deactivation Time1
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the deactivation of Service Type 1 occurred.
Service Deactivation Time2
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the deactivation of Service Type 2 occurred.
Service Deactivation Time3
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the deactivation of Service Type 3 occurred.
Call Elapsed Time
String
11
DD:HH:MM:SS
The duration that the voice path was established. If this field is NULL, then no data was captured for this record.
Interconnect Elapsed Time
String
11
DD:HH:MM:SS
The duration that bandwidth was established with another carrier. If this field is NULL, no data was captured for this record.
Originating QOS Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time that the originating side QoS measurements were collected. If this field is NULL, then the associated Originating QoS parameters are to be ignored.
Terminating QOS Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time that the terminating side QoS measurements were collected. If this field is NULL, then the associated Terminating QoS parameters are to be ignored.
Originating Number
String
64
DIGITS
This field contains the calling party number after it has gone through the complete translation process on the BTS including any possible overriding. If this field is NULL, then no data was captured for this field.
Terminating Number
String
64
DIGITS
Directory number of the terminating party. If this field is NULL, then no data was captured for this record.
Charge Number
String
64
DIGITS
Directory number of the billable party. For Mexican ISUP scenarios this field is populated with the tarrification number. If this field is NULL, then no data was captured for this record.
Location Routing Number
String
64
DIGITS
The location routing number (LRN) of the switch to which the directory number has been ported. If this field is NULL, then no data was captured for this record.
Dialed Digits
String
64
DIGITS
This field contains the actual digits dialed by the originator of the call. This field only contains digits dialed in the first stage of the call when dialed by a subscriber that is homed on the Cisco BTS 10200 Softswitch.
This field is intended for troubleshooting purposes only. If the call is terminating to this switch from a subscriber homed elsewhere, then this field will contain the information in the ieCldPartyNum field. In this case - the digits stored may have been manipulated after the originator dialed. If this field is NULL, then no data was captured for this record.
Forwarding Number
String
64
DIGITS
Directory number that is forwarding the call to another subscriber's DN. This field is populated only in the call forwarding instance record leg, not in the normal call leg that terminated to the forwarding number. If this field is NULL, then no data was captured for this record.
Service Type 1
Numeric
1 = CALL_BLOCKClass name of the first service invoked in call. If this field is a value of ZERO, then no data was captured for this record.
2 = CALL_FORWARD_UNCONDITIONAL
3 = CALL_WAITING
4 = REPEAT_CALL
5 = RETURN_CALL
6 = CALL_HOLD
7 = THREE_WAY_CALL
8 = CALL_TRANSFER
9 = CALLING_NUMBER_DELIVERY
10 = CALLING_NUMBER_DELIVERY_BLOCK
11 = CALL_FORWARD_BUSY
12 = CLASS_OF_SERVICE
13= CALLING_NAME_DELIVERY
14 = CALL_FORWARD_NO_ANSWER
15 = AIN_HANDLING
16 = 911_HANDLING
17 = CUSTOM_DIALING_PLAN
18 = CALLING_ID_DELIVERY_BLOCK_PERM
19 = SFG_INCOMING
20 = SFG_OUTGOING
21 = CANCELLED_CALL_WAITING
22 = USER_SENSITIVE_3WAY_CALL
23 = TOLL_FREE
24 = ACCT_CODE
25 = AUTH_CODE
26 = LOCAL_NUMBER_PORTABILITY
27 = CALLER_IDENTITY_DELIVERY_SUSPENSION
28 = CALLING_NAME_DELIVERY_BLOCKING
29 = CALL_WAITING_WITH_CALLER_IDENTITY
30 = ANONYMOUS_CALL_REJECTION
31 = TOLL_FREE_CALL
32 = CUSTOMER_ORIGINATED_TRACE
33 = CALL_PARK
34 = CALL_PARK_RETRIEVAL
35 = CALL_PARK_REOFFERED
36 = DIRECTED_CALL_PICKUP WITH BARGE-IN
37 = DIRECTED_CALL_PICKUP WITHOUT BARGE-IN
38 = HOTLINE
39 = WARMLINE
Service Type 1
(continued)Numeric
40= BUSY_LINE_VERIFICATIONClass name of the first service invoked in call. If this field is a value of ZERO, then no data was captured for this record.
41 = SELECTIVE_CALL_REJECTION
42 = SELECTIVE_CALL_FORWARDING
43 = SELECTIVE_CALL_ACCEPTANCE
44 = AUTOMATIC_CALLBACK
45 = AUTO_RECALL
46 = SPEED_CALLING
47 = DO_NOT_DISTURB
48 = REMOTE_ACTIVATION OF CALL_FORWARDING
49 = REMOTE_ACTIVATION OF CALL_FORWARDING PIN
50 = DRCW DISTINCTIVE_RING_CALL_WAITING
51 = SCREENING_LIST_EDIT SCF
52 = SCREENING_LIST_EDIT SCA
53 = SCREENING_LIST_EDIT SCR
54 = SCREENING_LIST_EDIT DRCW
55 = REJECT_CALLER
56 = CALL WAITING DELUXE
57 = THREE WAY CALL DELUXE
58 = OUTGOING CALL BARRING
59 = HOTLINE VARIABLE
60 = CNAM SCP Query
61 = REFER
Service Type 2
Numeric
(same as Service Type 1 above)
The class name of the second service invoked within the call.
Service Type 3
Numeric
(same as Service Type 1 above)
The class name of the third service invoked within the call.
Feature Data 1
String
30
See "Feature Server Derived Call Data" for specifics on feature data.
Feature specific data provided by the associated Feature Server for the Service Type 1 of a call. If this field is NULL, then no data was captured for this record.
Feature Data 2
String
30
See "Feature Server Derived Call Data" for specifics on feature data.
Feature specific data provided by the associated Feature Server for the Service Type 2 of a call. If this field is NULL, then no data was captured for this record.
Feature Data 3
String
30
See "Feature Server Derived Call Data" for specifics on feature data.
Feature specific data provided by the associated Feature Server for the Service Type 3 of a call. If this field is NULL, then no data was captured for this record.
Authorization Code
String
25
DIGITS
Authorization code information. If this field is NULL, then no data was captured for this record.
Account Code
String
15
DIGITS
Account code information. If this field is NULL, no data was captured for this record.
Database Query Type1
Numeric
0 = RESERVED (null)
1 = TOLL_FREE_ LOCAL
2 = TOLL_FREE_SCP
3 = LNP
Indicator of the specific type of 800 or LNP query performed on the first database query for the call. If this field is a value of ZERO, then no data was captured for this record.
Database Query Result Code1
Numeric
1 = SUCCESS
2 = FAILUREIndication of the disposition of the first database query for the call. If this field is a value of ZERO, then no data was captured for this record.
Returned Number 1
String
128
DIGITS
Directory number returned from the first database query for the call. If this field is NULL, then no data was captured for this record.
MLH Centrex Group Name
String
16
ASCII characters
Identity of the multi-line hunt group (MLHG) or Centrex group that this call is associated with. If this field is NULL, then no data was captured for this record.
Called Party Off Hook Indicator
Numeric
0 = NO
1 = YESIndication that the terminating party went off-hook
Called Party Short Off Hook Indicator
Numeric
0 = NO
1 = YESIndication that the called party was off-hook for less than two seconds
Call Termination Cause
Numeric
See Appendix C, "Release Cause Codes," in the Cisco BTS 10200 Operations, Maintenance, and Troubleshooting Guide.
The reason the call was released. If this field is a value of ZERO, then no data was captured for this record.
Operator Action
Numeric
0 = AUTO_IDENTIFIED_
CUSTOMER_DIALED1 = AUTO_IDENTIFIED_
OPERATOR_DIALED2 = OPER_IDENTIFIED_
CUSTOMER_DIALED3 = OPER_IDENTIFIED_
OPERATOR_DIALEDOperator action with respect to the originating party:
automatically identified—
customer dialed (0) or operator dialed (1)
or
operator identified—
customer dialed (2) or operator dialed (3)Originating Signaling Type
Numeric
0 = LINE (MGCP)
1 = SS7
2 = ISDN
3 = CAS
4 = MGCP
5 = SIP
6 = H323
Denotes trunk type of originator.
Termination Signaling Type
Numeric
0 = LINE (MGCP)
1 = SS7
2 = ISDN
3 = CAS
4 = MGCP
5 = SIP
6 = H323
Denotes trunk type of terminator.
Originating Trunk Number
Numeric
32 bit unsigned integer in the range of 1- 99999999
Identity of the originating trunk. It is recommended the upper end of this range be limited to 9999 when converting these records to BAF AMA format for compatibility.
If this field is a value of ZERO, then no data was captured for this record.
Terminating Trunk Number
Numeric
32 bit unsigned integer in the range of 1- 99999999
Identity of the terminating trunk. It is recommended the upper end of this range be limited to 9999 when converting these records to BAF AMA format for compatibility.
If this field is a value of ZERO, then no data was captured for this record.
Outgoing Trunk Number
Numeric
16 bit unsigned integer
The outgoing trunk is on the network facing side of the access tandem. When a call is terminated to the access tandem it is over a generic trunk group and the TNS is passed, and, based on the TNS, the access tandem will select the trunk for routing, for example 0288 will select an AT&T trunk. The access tandem then sends an exit message back with the trunk number from the network facing side. That is the number that appears in this field.
If this field is a value of ZERO, then no data was captured for this record.
Carrier Identification Code
String
5
DIGITS
Identification of the carrier that transported the call, either an inter-exchange carrier or an international carrier. This value is typically 3- or 4-digits, not necessarily 5-digits. If this field is NULL, then no data was captured for this record.
Originating Circuit Identifier
16 bit unsigned integer in the range of 0 - 16383
This field is used to represent the Circuit Id of Inc ISUP trunk. If this field is a value of ZERO, then no data was captured for this record.
Terminating Circuit Identifier
Numeric
16 bit unsigned integer in the range of 0 - 16383
This field is used to represent the Circuit Id of Outgoing ISUP trunk. If this field is a value of ZERO, then no data was captured for this record.
PIC Source
Numeric
1 = PIC_DIALED
2 = PIC_DEFAULT
Indication of how the carrier's access code was entered—dialed or via PIC. If this field is a value of ZERO, then no data was captured for this record.
Inter-exchange carrier or international carrier indicator
Numeric
0 = CIC_FGD_OPERATOR_
INVOLVED1 = CIC_FGD_OPERATOR_ NOT_INVOLVED
2 = CIC_FGD_OPERATOR_
INVOLVED_UNKNOWN7 = CIC_UNKNOWN_OPERATOR_
INVOLVED8 = CIC_UNKNOWN_OPERATOR_
NOT_INVOLVED9 = CIC_UNKNOWN_OPERATOR_
INVOLVED_UNKNOWNDescribes operator involvement: FGD CIC with (1) operator involvement, (2) dialed direct with no operator, (3) with undetermined operator involvement, or unknown CIC with
(1) operator involvement,
(2) dialed direct with no operator, or
(3) undetermined operator involvement.Note
Inter-exchange carrier or international carrier Event Status Indicator
Numeric
Call is abandoned or release before IAM is sent by originating EC = 15
Call is abandoned or release after IAM is received by originating EC = 20
Indication of how far a call has progressed before terminating when an IC/INC is involved.
Note
Inter-exchange carrier or international carrier Routing Indicator
Numeric
0 = DIRECT
1= TANDEM
2 = CAP_ENDOFFICE
3 = CAP_TANDEM
4 = TANDEM_TSP
Describes how the call was routed to/from the IC/INC: EAEO direct to IC/INC, or EAEO via AT to INC/IC, or CAP direct from EO, or CAP direct from AP tandem.
Note
Orig Quality of Service Packets Sent
Numeric
32 bit unsigned value
Number of packets sent over bearer path for duration of call reported by media gateway
Orig Quality of Service Packets received
Numeric
32 bit unsigned value
Number of packets received over bearer path for duration of call reported by media gateway.
Orig Quality of Service Octets Sent
Numeric
32 bit unsigned value
Number of octets sent over bearer path for duration of call reported by media gateway.
Orig Quality of Service Octets Received
Numeric
32 bit unsigned value
Number of octets received over bearer path for duration of call reported by media gateway.
Orig Quality of Service Packets Lost
Numeric
32 bit unsigned value
Number of packets lost over bearer path for duration of call reported by media gateway.
Orig Quality of Service Jitter
Numeric
32 bit unsigned value
Amount of jitter over bearer path for duration of call reported by media gateway
Orig Quality of Service Average Latency
Numeric
32 bit unsigned value
Average latency over bearer path for duration of call reported by media gateway
Term Quality of Service Packets Sent
Numeric
32 bit unsigned value
Number of packets sent over bearer path for duration of call reported by media gateway
Term Quality of Service Packets received
Numeric
32 bit unsigned value
Number of packets received over bearer path for duration of call reported by media gateway
Term Quality of Service Octets Sent
Numeric
32 bit unsigned value
Number of octets sent over bearer path for duration of call reported by media gateway
Term Quality of Service Octets Received
Numeric
32 bit unsigned value
Number of octets received over bearer path for duration of call reported by media gateway
Term Quality of Service Packets Lost
Numeric
32 bit unsigned value
Number of packets lost over bearer path for duration of call reported by media gateway
Term Quality of Service Jitter
Numeric
32 bit unsigned value
Amount of jitter over bearer path for duration of call reported by media gateway
Term Quality of Service Average Latency
Numeric
32 bit unsigned value
Average latency over bearer path for duration of call reported by media gateway
Operator Involvement
Numeric
0 = NO, 1 = YES
Determines if operator is involved in the call for 0-, 0+, or 01+.
Casual Dialing
Numeric
0 = NO, 1 = YES
Determines whether it is a casual call (CIC) or PIC call.
Connection Type
Numeric
0 = IP
1 = HAIRPIN
3 = ATM SVC
4 = ATM PVCType of connection gateway is making so the reader of the record will know why the QoS parameters are different than expected.
For example, if a Hairpin connection is used, then the QoS will be zeros.
Packet Time
Numeric
8 bit unsigned value
Packetization period for voice sampling. If this field is a value of ZERO, then no data was captured for this record.
Silence Suppression
Numeric
0 = NO, 1 = YES
Indicates if silence suppression is enabled or not.
Echo Cancellation
Numeric
0 = NO, 1 = YES
Indicates if echo cancellation at far end is enabled or not.
Codec Type
Numeric
1= PCMU G711
2 = PCMA G711
3 = G729A
4 = G729B
5 = G729E
6 = G729
7 = G726-40
8 = G726-32
9 = G726-24
10 = G726-16
11 = G728
12 = G723-H
13 = G723A-H
14 = G723-L
15 = G723A-L
16 = G723
Codec used to transport RTP traffic.
If this field is a value of ZERO, then no data was captured for this record.
Interstate Indicator
Numeric
0 = NO, 1 = YES
Indicates whether call crossed a state boundary or not.
Record Type
Numeric
0 = NORMAL_RECORD
1 = FIRST_LONG_DURN_RECORD
2 = CONTINUATION_
LONG_DURN_RECORD3 = LAST_LONG_DURN_RECORD
4 = INVALID_RECORD
Indicates whether record is involved in long duration call accounting or not.
Timer Indicator
Numeric
1 = FIRST
2 = CONTINUATION
Type of long duration record. If this field is a value of ZERO, then no data was captured for this record.
Present Time
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
Time the continuation record was created.
Overall Correlation Identifier
String
25
Alphanumeric characters
This field is unique on a per call scenario basis; not on a per record basis. Any call scenario that results in multiple call records being generated by the Cisco BTS 10200, each will contain the same value in this field. The main use at this time is within the real time Event Message billing stream that is supported by the BTS for PacketCable compliancy and for correlation of multiple record call scenarios. This field should always be populated.
JIP
String
10
Alphanumeric characters
Jurisdiction information parameter used for tarriffing purposes. If this field is NULL, then no data was captured for this record.
Originating CLLI
String
11
Alphanumeric characters
Trunk Group Name for originating call leg. If this field is NULL, then no data was captured for this record.
Terminating CLLI
String
11
Alphanumeric characters
Trunk Group Name for terminating call leg. If this field is NULL, then no data was captured for this record.
Call Agent Id
String
8
Alphanumeric characters
Identifies Call Agent on which CDB is created. If this field is NULL, then no data was captured for this record.
Originating POP Time Zone
Numeric
1 = EST
2 = CST
3 = MST
4 = AST
5 = PST
6 = EDT
7 = CDT
8 = MDT
9 = PDT
10 = ADT
11= GMT
12 = PRC
13 = Hong Kong
Time zone that is associated with the originating POP the call agent is operating in that created the CDB. If this field is a value of ZERO, then no data was captured for this record.
Service Usage Sensitive 1
Numeric
0 = FALSE, 1 = TRUE
Note
Indication of whether first service usage within the call context was usage sensitive or not.
Service Usage Sensitive 2
Numeric
0 = FALSE, 1 = TRUE
Note
Indication of whether second service usage within the call context was usage sensitive or not.
Service Usage Sensitive 3
Numeric
0 = FALSE, 1 = TRUE
Note
Indication of whether third service usage within the call context was usage sensitive or not.
Originating H323 Call Origin
Numeric
0 = NULL
1 = ANSWER
2 = ORIGINATE
ANSWER indicates call terminated on reporting gateway.
ORIGINATE indicates call was outbound from reporting gateway for originating half of call.
Note
Originating H323 Call Type
Numeric
1 = VOIP
2 = TELEPHONY
3 = VIDEO
Value indicates protocol family used on originating leg of the call.
Note
Originating H323 Conference Id
String
32
Alphanumeric characters.
Unique identifier generated by originating PSTN gateway for each unique call scenario within a given call context.
Note
Originating H323 Remote Address
String
16
Alphanumeric characters.
IP address of originating remote gateway.
Note
Originating H323 Time Day
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
Time of day terminating number was dialed for originating half of call.
Note
Originating H323 Voice Quality
Numeric
This field is not populated for this release.
Quality of voice connection for originating side of call. This is a decimal number from the ICPIF table of G.113.
Originating H323 Subscriber
Numeric
This field is not populated for this release.
Subscriber T1/CAS signaling information from originating side of call.
Originating H323 Gateway Id
String
16
Alphanumeric characters.
For incoming calls from an H323 network, this field will contain the h323-id of the originating (peer) H323 gateway/endpoint. If this parameter is not available in the incoming H323 call, the Cisco BTS 10200 will populate this field with local h323-id from the H323-GW that received the call. For incoming calls from non-H323 networks, this field is NULL.
Note
Originating H323 Gatekeeper Id
String
16
Alphanumeric characters.
The hostname of the originating primary gatekeeper for the call.
Note
Terminating H323 Call Origin
Numeric
0 = NULL
1 = ANSWER
2 = ORIGINATEANSWER indicates the call terminated on the reporting gateway
ORIGINATE indicates the call was outbound from the reporting gateway for the terminating half of the call.
Note
Terminating H323 Call Type
Numeric
1 = VOIP
2 = TELEPHONY3 = VIDEO
Indication of the protocol family used on the terminating leg of the call.
Note
Terminating H323 Conference Id
String
32
Alphanumeric characters.
A unique identifier generated by the terminating PSTN gateway for each unique call scenario within a given call context.
Note
Terminating H323 Remote Address
String
16
Alphanumeric characters.
The IP address of the terminating remote gateway.
Note
Terminating H323 Time Day
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time of day that the terminating number was dialed for the terminating half of the call.
Note
Terminating H323 Voice Quality
Numeric
This field is not populated for this release.
The quality of voice connection for the terminating side of the call. This is a decimal number from the ICPIF table of G.113.
If this field is a value of ZERO, no data was captured for record.
Terminating H323 Subscriber
Numeric
This field is not populated for this release.
Subscriber T1/CAS signaling information from terminating side of call.
If this field is a value of ZERO, no data was captured for this record.
Terminating H323 Gateway Id
String
16
Alphanumeric characters.
For outgoing calls from BTS and terminating to an H323 network, this field will contain h323-Id of the terminating (peer) H323 gateway/endpoint if available in backward Call signaling message. If this parameter is not available from terminating H323 Gateway/endpoint BTS will populate the local h323-id from H323-GW which is used to send out the call. For outgoing calls to no H323 network, this field is NULL.
Note
Terminating H323 Gatekeeper Id
String
16
Alphanumeric characters.
The symbolic host name assigned to the terminating primary gatekeeper for the call.
Note
Orig Type
Numeric
0 = ON NET
1 = OFF NET
Indication of whether call was originated by a subscriber homed on the reporting Cisco BTS 10200 Softswitch.
Term Type
Numeric
0 = ON NET
1 = OFF NET
Indication of whether call was terminated by subscriber homed on the reporting Cisco BTS 10200 Softswitch.
Source Service Provider Id
String
16
Alphanumeric characters
Service provider id supplied by gatekeeper for calls coming into PSTN gateway. Information is derived from inbound trunk group. If this field is NULL, no data was captured for this record.
Destination Service Provider Id
String
16
Alphanumeric characters
Service provider id used for calls routing out of the PSTN gateway. Information is derived from outbound trunk group. If this field is NULL, no data was captured for this record.
Source Carrier Id
String
4
Numeric characters
Carrier id of carrier provided by customer. If call is not coming in from an Access Tandem, this field is trunk group of incoming trunk. If this field is NULL, no data was captured for this record.
Destination Carrier Id
String
4
Numeric characters
Carrier id provided by outgoing trunk group. If this field is NULL, no data was captured for this record.
Originating SIP Username
String
64
Alphanumeric characters.
MSN PUID from Proxy Authorization header field for all MSN calls. Username value of From field for all other SIP calls.
Note
Originating SIP Call Id
String
64
Alphanumeric characters.
SIP Call Id header field. This field is a truncation of SIP Call Id header field received via SIP if it is over 64 characters in length.
Note
Originating SIP Adjacent Hop Address
String
16
Alphanumeric characters.
IP address of last proxy that forwarded calls inbound to Cisco BTS 10200 Softswitch.
IP address of proxy to which outbound calls from the Cisco BTS 10200 are forwarded.
Note
Database Query Time 2
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
Time the second database query response was received for this call. If the value is zero, timestamp is ignored.
Database Query Result Code 2
Numeric
1 = SUCCESS
2 = FAILURE
Indicates disposition of the second database query for call. If this field is a value of ZERO, no data was captured for this record.
Database Query Type2
Numeric
1 = TOLL_FREE_ SCP
2 = TOLL_FREE_LOCAL
3 = LNP
4 = CNAM_SCP
Indicates specific type of 800 or LNP query performed on second database query for call. If this field is a value of ZERO, no data was captured for this record.
Returned Number 2
String
128
DIGITS, DIGITS
The directory number returned from the second database query for the call. If field is NULL, no data was captured for this record.
Database Query Time 3
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is ZERO, the timestamp is to be ignored.
The time the third database query response was received for this call.
Database Query Result Code 3
Numeric
1 = SUCCESS
2 = FAILURE
Indicates disposition of third database query for call. If this field is a value of ZERO, no data was captured for this record.
Database Query Type 3
Numeric
1 = TOLL_FREE_ SCP
2 = TOLL_FREE_LOCAL
3 = LNP
4 = CNAM_SCP
Indicates specific type of 800 or LNP query performed on the third database query for the call.
Returned Number 3
String
128
DIGITS, DIGITS
Directory number returned from third database query for call. If this field is NULL, no data was captured for this record.
Service Result Code1
Numeric
1 = SUCCESS
2 = FAILURE
3 = ANI INVALID
4 = ANI BLOCKED
5 = CASUAL CALLS NOT ALLOWED
6 = II SCREENING REJECT
7 = BW SCREENING REJECT
8 = COS RESTRICTED
Indicates disposition of first service activation, service deactivation, or service instance within the call context.
Note
Service Result Code2
Numeric
(same as Service Result Code 1)
Indicates disposition of second service activation, service deactivation, or service instance within the call context.
Note
Service Result Code3
Numeric
(same as Service Result Code 1)
Indicates disposition of third service activation, service deactivation, or service instance within the call context.
Note
NAS Error Code
Numeric
800 = ISP PORT LIMIT OVERRUN
801 = NO MODEMS AVAILABLE
802 = ORIGINATING NUMBER UNACCEPTABLE
803 = TERMINATING NUMBER UNACCEPTABLE
Specific error code explaining reason that this NAS call could not be completed.
If this field is a value of ZERO, no data was captured for this record.
NAS DLCX Reason
Numeric
801 = USER REQUEST
802 = LOST CARRIER
803 = LOST SERVICE
804 = IDLE TIMEOUT
805 = SESSION TIMEOUT
806 = ADMIN RESET
807 = ADMIN REBOOT
808 = PORT ERROR
809 = NAS ERROR
810 = NAS REQUEST
811 = NAS REBOOT
812 = PORT UN-NEEDED
813 = PORT PRE-EMPTED
814 = PORT SUSPENDED
815 = SERVICE UNAVAILABLE
816 = CALLBACK
817 = USER ERROR
818 = HOST REQUEST
Reason code returned in the DLCX message for NAS calls.
If this field is a value of ZERO, no data was captured for this record.
NAS Pre-Authorization Result
Numeric
0 = NULL
1 = AU—EVERYTHING IS OK
2 = AX—CGN/CDN NUMBERS
ARE NOT GOOD3 = OF—MODEM FAILURE
Indicates result of performing pre-authorization on a NAS-based call.
If this field is a value of ZERO, no data was captured for this record.
Fax Indicator
Numeric
1= NOT FAX
2 = FAX ONLY
3 = VOICE AND FAX
Indication of whether the call involved any fax transmissions. Value of 1 (Not Fax) indicates no fax transmissions occurred, the other two values indicate faxes were sent or received.
Fax Pages Sent
Numeric
The range of values is 0 - 999.
Number of fax pages sent during call.
Fax Pages Received
Numeric
The range of values is 0 - 999.
Number of fax pages received during call.
Service Interrogation Time 1
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the interrogation of Service Type 1 occurred.
Service Interrogation Time 2
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the interrogation of Service Type 2 occurred.
Service Interrogation Time 3
Numeric
32 bit unsigned value in GMT epoch time format. The number of seconds since Jan 1,1970 0:00:00h.
If the value is zero, the timestamp is to be ignored.
The time the interrogation of Service Type 3 occurred.
Originating Pop Id
String
16
Alphanumeric characters
This is the point of presence that the originating subscriber on the BTS is provisioned on. This field provides information on the locale of which the subscriber is a member. This information can also be leveraged for partitioning subscribers on a single BTS into multiple business entities for billing purposes. If this field is NULL, no data was captured for this record.
Terminating Pop Id
String
16
Alphanumeric characters
This is the point of presence that the terminating subscriber on the BTS is provisioned on. This field provides information on the locale of which the subscriber is a member. This information can also be leveraged for partitioning subscribers on a single BTS into multiple business entities for billing purposes. If this field is NULL, no data was captured for this record.
Terminating POP Time Zone
Numeric
EST = 1
CST = 2
MST = 3
AST = 4
PST = 5
EDT = 6
CDT = 7
MDT = 8
PDT = 9
ADT = 10
GMT = 11
PRC = 12
HONGKONG = 13
Time zone associated with the POP of the terminating party that created the CDB.
If this field is a value of ZERO or NULL, then no data was captured for this record.
Dial Plan Id
String
16
Alphanumeric characters.
Dial plan used for call routing purposes by originating subscriber on Cisco BTS 10200. The dial plan defines valid digit patterns for the subscriber in addition to routing based on the dialed digits. If this field is NULL, no data was captured for this record.
GTD Global Call Indicator
String
32
Alphanumeric characters inclusding hyphens.
GTD Global Call Identification field populated only for H.323 calls with GTD enabled.
The Cisco BTS 10200 will use the GCI format consistent with the IOS GTD implementation, which is in the form of a 16-character ASCII representation of a UTC timestamp followed by a 4-character ASCII representation of the clock sequence, plus a 12-character ASCII representation of the MAC address This field will always be in the length of 32 characters. If this field is NULL, no data was captured for this record.
Terminating SIP Username
String
64
Alphanumeric characters.
The username value of the "From" field on the terminating side for all outgoing SIP calls. This field is populated only for SIP calls. If this field is NULL, no data was captured for this record.
Terminating SIP Call Id
String
64
Alphanumeric characters.
The SIP Call ID header field. This field is a truncation of the SIP Call ID header field received via SIP if it is over 64 characters in length. This field is populated only for outgoing SIP calls. If this field is NULL, no data was captured for this record.
Terminating SIP Adjacent Hop Address
String
16
Alphanumeric characters
The IP address of the proxy or SIP User Agent that the call is sent to for calls outbound from the BTS. This field is only populated for outgoing SIP calls. If this field is NULL, then no data was captured for this record.
Originating SIP Type
Numeric
SUBSCRIBER = 1
SIP = 2
SIP-T = 3
CMSS = 4
The type of SIP call on the inbound side. This field is only populated for SIP originations. If this field is a value of ZERO, no data was captured for this record.
Terminating SIP Call Type
Numeric
SUBSCRIBER = 1
SIP = 2
SIP-T = 3
CMSS = 4
The type of SIP call on the outbound side. This field is only populated for SIP terminations. If this field is a value of ZERO, no data was captured for this record.
Originating Network Provider Id
String
16
Alphanumeric characters.
Originating network service provide (ISTP) id returned by the Gatekeeper in the ACF message for outbound H.323 calls. If this field is NULL, then no data was captured for this record
Destination Network Provider Id
String
16
Alphanumeric characters.
Destination network service provide (ISTP) id returned by the Gatekeeper in the ACF message for outbound H.323 calls. If this field is NULL, then no data was captured for this record.
Original Originating Number
String
64
DIGITS
This field contains the calling number received in the SETUP Message after digit manipulation is performed, but before any overriding occurs, such as overwriting with a billing dn. If this field is NULL, then no data was captured for this field.
Video codec
Numeric
None = 0 (future)
H.261 = 1 (future)
H.263 = 2 (future)
H.264 = 3 (future)
This field is always zero in release 4.2
The codec used to transport the RTP traffic. The value in this field is pulled from the provisioning of the Cisco BTS 10200 Softswitch, not from the actual SDP message.
Calling Party Category
Numeric
Unknown = 0
National Operator = 9
Ordinary Subscriber = 10
Subscriber w/Priority = 11
Voice Band Data = 12
Test Call = 13
Pay Phone = 15
Line Test Desk = 249
Interception Operator = 250
Immediate Charge Info = 251
The Calling Party Category value that was received in the SS7 IAM.
Called Party Category Indicator
Numeric
No Indication = 0
Ordinary Subscriber = 1
Payphone = 2
The Called Party Category Indicator value is derived from the FE bits of the Backward Call Indicator received via SS7.
