Table Of Contents
Cisco Wireless LAN Controller
Command ReferenceSHOW ADVANCED 802.11A COMMANDS
show advanced 802.11a receiver
SHOW ADVANCED 802.11B COMMANDS
show advanced 802.11b receiver
show advanced send-disassoc-on-handoff
show certificate compatibility
show client location-calibration summary
show local-auth statistics - TBD Need Info
show radius rfc3576 statistics
show tacacs summary - TBD Need Info
show wps signature events standard
show wps signature events summary
config 802.11a antenna extAntGain
config 802.11a antenna diversity
config 802.11a antenna selection
802.11a CAC Video and Voice Commands
config 802.11a cac video max-bandwidth
config 802.11a cac video roam-bandwidth
config 802.11a cac video tspec-inactivity-timeout
config 802.11a cac voice max-bandwidth
config 802.11a cac voice roam-bandwidth
config 802.11a cac voice tspec-inactivity-timeout
config 802.11a cac voice load-based
config 802.11a cac voice stream-size
config 802.11b antenna diversity
config 802.11b antenna extAntGain
config 802.11b antenna selection
802.11b CAC Video and Voice Commands
config 802.11b cac video max-bandwidth
config 802.11b cac video roam-bandwidth
config 802.11b cac video tspec-inactivity-timeout
config 802.11b cac voice max-bandwidth
config 802.11b cac voice roam-bandwidth
config 802.11b cac voice tspec-inactivity-timeout
config 802.11b cac voice load-based
config 802.11b cac voice stream-size
config 802.11h powerconstraint
CONFIG ADVANCED 802.11A COMMANDS
config advanced 802.11a channel foreign
config advanced 802.11a channel load
config advanced 802.11a channel noise
config advanced 802.11a channel update
config advanced 802.11a factory
config advanced 802.11a group-mode
config advanced 802.11a logging channel
config advanced 802.11a logging coverage
config advanced 802.11a logging foreign
config advanced 802.11a logging load
config advanced 802.11a logging noise
config advanced 802.11a logging performance
config advanced 802.11a logging txpower
config advanced 802.11a monitor channel-list
config advanced 802.11a monitor coverage
config advanced 802.11a monitor load
config advanced 802.11a monitor mode
config advanced 802.11a monitor noise
config advanced 802.11a monitor signal
config advanced 802.11a profile clients
config advanced 802.11a profile coverage
config advanced 802.11a profile customize
config advanced 802.11a profile exception
config advanced 802.11a profile foreign
config advanced 802.11a profile level
config advanced 802.11a profile noise
config advanced 802.11a profile throughput
config advanced 802.11a profile utilization
config advanced 802.11a receiver
config advanced 802.11a txpower-update
CONFIG ADVANCED 802.11B COMMANDS
config advanced 802.11b 7920VSIEConfig
config advanced 802.11b channel foreign
config advanced 802.11b channel load
config advanced 802.11b channel noise
config advanced 802.11b channel update
config advanced 802.11b factory
config advanced 802.11b group-mode
config advanced 802.11b logging channel
config advanced 802.11b logging coverage
config advanced 802.11b logging foreign
config advanced 802.11b logging load
config advanced 802.11b logging noise
config advanced 802.11b logging performance
config advanced 802.11b logging txpower
config advanced 802.11b monitor channel-list
config advanced 802.11b monitor coverage
config advanced 802.11b monitor load
config advanced 802.11b monitor mode
config advanced 802.11b monitor noise
config advanced 802.11b monitor signal
config advanced 802.11b profile clients
config advanced 802.11b profile coverage
config advanced 802.11b profile customize
config advanced 802.11b profile exception
config advanced 802.11b profile foreign
config advanced 802.11b profile level
config advanced 802.11b profile noise
config advanced 802.11b profile throughput
config advanced 802.11b profile utilization
config advanced 802.11b receiver
config advanced 802.11b txpower-update
config advanced client-handoff
CONFIG ADVANCED TIMERS COMMANDS
config advanced timers ap-discovery-timeout
config advanced timers ap-heartbeat-timeout
config advanced timers auth-timeout
config advanced timers eap-timeout
config advanced timers eap-identity-request-delay
config ap crash-file clear-all
config ap crash-file get-crash-file
config ap crash-file get-radio-core-dump
config client ccx stats-request
config client location-calibration
config custom-web ext-webauth-mode
config custom-web ext-webauth-url
config custom-web ext-webserver
config local-auth user-credentials
config location interface-mapping
config macfilter mac-delimiter
config macfilter radius-compat
config mesh secondary-backhaul
config mobility statistics reset
config netuser maxEapUserLogin
config network allow-old-bridge-aps
config network bridging-shared-secret
config network fast-ssid-change
config network mgmt-via-wireless
config network rf-network-name
config port multicast appliance
config radius acct ipsec authentication
config radius acct ipsec disable
config radius acct ipsec enable
config radius acct ipsec encryption
config radius acct retransmit-timeout
config radius auth ipsec authentication
config radius auth ipsec disable
config radius auth ipsec enable
config radius auth ipsec encryption
config radius auth retransmit-timeout
config radius aggressive-failover disabled
config radius backward compatibility
config radius callStationIdType
CONFIG SNMP COMMUNITY COMMANDS
config snmp community accessmode
CONFIG SNMP TRAPRECEIVER COMMANDS
config snmp trapreceiver create
config snmp trapreceiver delete
CONFIG SPANNINGTREE PORT COMMANDS
config spanningtree port pathcost
config spanningtree port priority
CONFIG SPANNINGTREE SWITCH COMMANDS
config spanningtree switch bridgepriority
config spanningtree switch forwarddelay
config spanningtree switch hellotime
config spanningtree switch maxage
config spanningtree switch mode
config switchconfig flowcontrol
config trapflags 802.11-Security
config trapflags authentication
CONFIG WIRELESS LAN SECURITY COMMANDS
config wlan security ckip ....
config wlan security ipsec disable
config wlan security ipsec enable
config wlan security ipsec authentication
config wlan security ipsec encryption
config wlan security ipsec config
config wlan security ipsec ike authentication
config wlan security ipsec ike dh-group
config wlan security ipsec ike lifetime
config wlan security ipsec ike phase1
config wlan security ipsec ike contivity
config wlan security static-wep-key authentication
config wlan security static-wep-key disable
config wlan security static-wep-key enable
config wlan security static-wep-key encryption
config wlan security web-passthrough acl
config wlan security web-passthrough disable
config wlan security web-passthrough email-input
config wlan security web-passthrough enable
config wlan security wpa1 disable
config wlan security wpa1 enable
config wlan security wpa1 pre-shared-key
config wlan security wpa2 disable
config wlan security wpa2 enable
config wlan security wpa2 pre-shared-key
config wlan security wpa2 tkip
config wlan security wpa2 wpa-compat
lwapp ap controller ip address
Clearing Configurations, Logfiles, and Other Actions
Uploading and Downloading Files and Configurations
transfer download certpassword
transfer download tftpPktTimeout
transfer download tftpMaxRetries
Cisco Wireless LAN Controller
Command Reference
The Cisco Wireless LAN Solution command line interface (CLI) enables operators to connect an ASCII console to the Cisco Wireless LAN Controller and configure the controller and its associated access points.
This document covers the Cisco CLI release 4.1 commands for the following platforms:
•
Cisco 2000 series Wireless LAN Controllers
•
•
•
•
•
This chapter contains the following sections:
•
•
Using the ? command
To display all of the commands in your current level of the command tree, or to display more information about a particular command, use the ? command.
?
command name ?
When you enter a command information request, put a space between command name and ?.
Examples
The following command shows you all the commands and levels available from the root level.
> ?clear Clear selected configuration elements.config Configure switch options and settings.debug Manages system debug options.help Helplinktest Perform a link test to a specified MAC address.logout Exit this session. Any unsaved changes are lost.ping Send ICMP echo packets to a specified IP address.reset Reset options.save Save switch configurations.show Display switch options and settings.transfer Transfer a file to or from the switch.The following command shows you that datatype is the only entry at the transfer download level:
> transfer download d?datatypeThe following command shows you the permissible entries for the transfer download datatype command:
> transfer download datatype ?config Download Configuration File.code Download an executable image to the system.image Download a web page logo to the system.signature Download a signature file to the system.webadmincert Download a certificate for web administration to the system.webauthcert Download a web certificate for web portal to the system.Using the Help Command
To look up keyboard commands, use the help command at the root level.
help
Examples
> helpHELP:Special keys:DEL, BS... delete previous characterCtrl-A .... go to beginning of lineCtrl-E .... go to end of lineCtrl-F .... go forward one characterCtrl-B .... go backward one characterCtrl-D .... delete current characterCtrl-U, X. delete to beginning of lineCtrl-K .... delete to end of lineCtrl-W .... delete previous wordCtrl-T .... transpose previous characterCtrl-P .... go to previous line in history bufferCtrl-N .... go to next line in history bufferCtrl-Z .... return to root command promptTab, <SPACE> command-line completionExit .... go to next lower command prompt? .... list choicesViewing Configurations
To view Cisco Wireless LAN controller options and settings, use the show commands.
show 802.11a
To display basic 802.11a options and settings, use the show 802.11a command.
show 802.11a
Syntax Description
Defaults
None.
Examples
> show 802.11a802.11a Network................................. Enabled802.11a Low Band......................... Enabled802.11a Mid Band......................... Enabled802.11a High Band........................ Enabled802.11a Operational Rates802.11a 6M Rate............................ Mandatory802.11a 9M Rate............................ Supported802.11a 12M Rate........................... Mandatory802.11a 18M Rate........................... Supported802.11a 24M Rate........................... Mandatory802.11a 36M Rate........................... Supported802.11a 48M Rate........................... Supported802.11a 54M Rate........................... SupportedBeacon Interval................................. 100CF Pollable mandatory........................... DisabledCF Poll Request mandatory....................... DisabledCFP Period...................................... 4CFP Maximum Duration............................ 100Default Channel................................. 36Default Tx Power Level.......................... 1DTPC Status..................................... EnabledDTIM Period..................................... 10Fragmentation Threshold......................... 2346Long Retry Limit................................ 4Maximum Rx Life Time............................ 512Max Tx MSDU Life Time........................... 512Medium Occupancy Limit.......................... 100Pico-Cell Status................................ DisabledRTS Threshold................................... 2347Short Retry Limit............................... 7TI Threshold.................................... -50Related Commands
show 802.11b, show advanced 802.11a channel, show advanced 802.11a group, show advanced 802.11a logging, show advanced 802.11a monitor, show advanced 802.11a power, show advanced 802.11a profile, show advanced 802.11a summary
show 802.11a l2roam
To display Layer 2 client roaming information for the 802.11a network, use the show 802.11a l2roam command.
show 802.11a l2roam {rf-param | statistics mac_address}
Syntax Description
Defaults
None.
Examples
> show 802.11a l2roam rf-paramL2Roam 802.11a RF Parameters.....................Config Mode.................................. DefaultMinimum RSSI................................. -85Roam Hysteresis.............................. 2Scan Threshold............................... -72Transition time.............................. 5> show 802.11a l2roam statisticsRadioMAC Request Report Broadcast Roam Report----------------- ------- ------ --------- -----------00:15:c7:2a:e8:f0 16 12 14 14Related Commands
config 802.11a l2roam, show client roam-history, debug l2roam
show 802.11b
To display basic 802.11b/g options and settings, use the show 802.11b command.
show 802.11b
Syntax Description
Defaults
None.
Examples
> show 802.11b802.11b Network.................................. Enabled11gSupport....................................... Enabled802.11b/g Operational Rates802.11b/g 1M Rate............................ Mandatory802.11b/g 2M Rate............................ Mandatory802.11b/g 5.5M Rate.......................... Mandatory802.11b/g 11M Rate........................... Mandatory802.11g 6M Rate.............................. Supported802.11g 9M Rate.............................. Supported802.11g 12M Rate............................. Supported802.11g 18M Rate............................. Supported802.11g 24M Rate............................. Supported802.11g 36M Rate............................. Supported802.11g 48M Rate............................. Supported802.11g 54M Rate............................. SupportedBeacon Interval.................................. 100CF Pollable mode................................. DisabledCF Poll Request mandatory........................ DisabledCFP Period....................................... 4CFP Maximum Duration............................. 60Default Channel.................................. 1Default Tx Power Level........................... 1DTPC Status..................................... EnabledCall Admission Limit ........................... 105G711 CU Quantum ................................. 15DTIM Period...................................... 1ED Threshold..................................... -50Fragmentation Threshold.......................... 2346Long Retry Limit................................. 4Maximum Rx Life Time............................. 512Max Tx MSDU Life Time............................ 512Medium Occupancy Limit........................... 100PBCC mandatory................................... DisabledPico-Cell Status................................. DisabledRTS Threshold.................................... 2347Short Preamble mandatory......................... EnabledShort Retry Limit................................ 7Related Commands
show 802.11a, show advanced 802.11b channel, show advanced 802.11b group, show advanced 802.11b logging, show advanced 802.11b monitor, show advanced 802.11b txpower, show advanced 802.11b profile, show advanced 802.11b summary
show 802.11b l2roam
To display Layer 2 client roaming information for the 802.11b network, use the show 802.11b l2roam command.
show 802.11a l2roam {rf-param | statistics mac_address}
Syntax Description
Defaults
None.
Examples
> show 802.11b l2roam rf-paramL2Roam 802.11b RF Parameters.....................Config Mode.................................. DefaultMinimum RSSI................................. -85Roam Hysteresis.............................. 2Scan Threshold............................... -72Transition time.............................. 5> show 802.11b l2roam statisticsRadioMAC Request Report Broadcast Roam Report----------------- ------- ------ --------- -----------00:15:c7:2a:e8:f0 16 12 14 14Related Commands
config 802.11b l2roam, show client roam-history, debug l2roam
show 802.11h
To display basic 802.11h options and settings, use the show 802.11h command.
show 802.11h
Syntax Description
Defaults
None.
Examples
> show 802.11h802.11h ......................................... powerconstraint : 0802.11h ......................................... channelswitch : Disable802.11h ......................................... channelswitch mode : 0Related Commands
show 802.11a, show 802.11b, config 802.11h
show aaa auth
To display the configuration settings for the AAA authentication server database search order, use the show aaa auth command.
show aaa auth
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no defaults.
Command History
Examples
> show aaa authManagement authentication server order:1............................................ local2............................................ tacacsRelated Commands
config trapflags aaa, config aaa auth, config wlan aaa-override, debug aaa, debug aaa local-auth
show acl
To display the access control lists (ACLs) that are configured on the controller, use the show acl command.
show acl {summary | detailed acl_name}
Syntax Description
Defaults
None.
Examples
> show acl summaryACL Name Applied-------------------------------- -------Pubs Only YesMannina YesRelated Commands
config interface acl
show acl cpu
To display the access control lists (ACLs) configured on the central processing unit (CPU), use the show acl cpu command.
show acl cpu
Syntax Description
Command Default
None
Examples
> show acl cpuCPU Acl Name................................Wireless Traffic............................ DisabledWired Traffic............................... DisabledApplied to NPU.............................. NoRelated Commands
config acl cpu
SHOW ADVANCED 802.11A COMMANDS
Use the SHOW ADVANCED 802.11a commands to display advanced 802.11a configuration parameters.
show advanced 802.11a channel
To display the automatic channel assignment configuration and statistics, use the show advanced 802.11a channel command.
show advanced 802.11a channel
Syntax Description
show
Display configurations.
advanced
Advanced parameters.
802.11a
802.11a network.
channel
Channel status.
Defaults
None.
Examples
> show advanced 802.11a channelAutomatic Channel AssignmentChannel Assignment Mode........................ AUTOChannel Update Interval........................ 600 secondsChannel Update Contribution.................... SNI.Channel Assignment Leader...................... xx:xx:xx:xx:xx:xxLast Run....................................... 374 seconds agoChannel Energy LevelsMinimum...................................... -84 dBmAverage...................................... -84 dBmMaximum...................................... -84 dBmChannel Dwell TimesMinimum...................................... 0 days, 19 h 07 m 57 sAverage...................................... 0 days, 19 h 08 m 29 sMaximum...................................... 0 days, 19 h 09 m 11 sRelated Commands
config 802.11a channel
show advanced 802.11a group
To display the advanced 802.11a Cisco radio RF grouping, use the show advanced 802.11a group command.
show advanced 802.11a group
Syntax Description
show
Display configurations.
advanced
Advanced parameters.
802.11a
802.11a network.
group
RF grouping values.
Defaults
None.
Examples
> show advanced 802.11a groupRadio RF Grouping802.11a Group Mode................................... AUTO802.11a Group Update Interval........................ 600 seconds802.11a Group Leader................................. xx:xx:xx:xx:xx:xx802.11a Group Member............................... xx:xx:xx:xx:xx:xx802.11a Last Run..................................... 133 seconds agoRelated Commands
config advanced 802.11a group-mode
show advanced 802.11a logging
To display advanced 802.11a RF event and performance logging, use the show advanced 802.11a logging command.
show advanced 802.11a logging
Syntax Description
show
Display configurations.
advanced
Advanced parameters.
802.11a
802.11a network.
logging
RF event and performance logging.
Defaults
None.
Examples
> show advanced 802.11a loggingRF Event and Performance LoggingChannel Update Logging......................... OffCoverage Profile Logging....................... OffForeign Profile Logging........................ OffLoad Profile Logging........................... OffNoise Profile Logging.......................... OffPerformance Profile Logging.................... OffTxPower Update Logging......................... OffRelated Commands
config advanced 802.11a logging channel, config advanced 802.11a logging coverage, config advanced 802.11a logging foreign, config advanced 802.11a logging load, config advanced 802.11a logging noise, config advanced 802.11a logging performance, config advanced 802.11a logging power
show advanced 802.11a monitor
To display the advanced 802.11a default Cisco radio monitoring, use the show advanced 802.11a monitor command.
show advanced 802.11a monitor
Syntax Description
show
Display configurations.
advanced
Advanced parameters.
802.11a
802.11a network.
monitor
Cisco radio monitoring values.
Defaults
None.
Examples
> show advanced 802.11a monitorDefault 802.11a AP monitoring802.11a Monitor Mode........................... enable802.11a Monitor Channels....................... Country channels802.11a AP Coverage Interval................... 180 seconds802.11a AP Load Interval....................... 60 seconds802.11a AP Noise Interval...................... 180 seconds802.11a AP Signal Strength Interval............ 60 secondsRelated Commands
config advanced 802.11a monitor coverage, config advanced 802.11a monitor load, config advanced 802.11a monitor noise, config advanced 802.11a monitor signal
show advanced 802.11a profile
To display the advanced 802.11a Cisco 1000 series lightweight access point performance profiles, use the show advanced 802.11a profile command.
show advanced 802.11a profile {global | Cisco_AP}
Syntax Description
Defaults
None.
Examples
> show advanced 802.11a profile globalDefault 802.11a AP performance profiles802.11a Global Interference threshold.............. 10%802.11a Global noise threshold..................... -70 dBm802.11a Global RF utilization threshold............ 80%802.11a Global throughput threshold................ 1000000 bps802.11a Global clients threshold................... 12 clients802.11a Global coverage threshold.................. 12 dB802.11a Global coverage exception level............ 80%802.11a Global client minimum exception lev........ 3 clients> show advanced 802.11a profile AP1Cisco 1000 series lightweight access point performance profile not customizedThis response indicates that the performance profile for this Cisco 1000 series lightweight access point is using the global defaults and has not been individually configured.
Related Commands
config advanced 802.11b profile clients, config advanced 802.11b profile coverage, config advanced 802.11b profile customize, config advanced 802.11b profile exception, config advanced 802.11b profile foreign, config advanced 802.11b profile level, config advanced 802.11b profile noise, config advanced 802.11b profile throughput, config advanced 802.11b profile utilization
show advanced 802.11a receiver
To display the configuration and statistics of the 802.11a receiver, use the show advanced 802.11a receiver command.
show advanced 802.11a receiver
Syntax Description
show
Display configurations.
advanced
Advanced parameters.
802.11a
802.11a network.
receiver
Receiver.
Defaults
None.
Examples
> show advanced 802.11a receiver802.11a Advanced Receiver SettingsRxStart : Signal Threshold........................... 15RxStart : Signal Lamp Threshold...................... 5RxStart : Preamble Power Threshold................... 2RxReStart : Signal Jump Status......................... EnabledRxReStart : Signal Jump Threshold...................... 10TxStomp : Low RSSI Status.............................. Enabled