Table Of Contents
Supported Devices Table for the CiscoWorks Wireless LAN Solution Engine, Release 2.0
Supported Access Points and Bridges
Supported Devices Table for the CiscoWorks Wireless LAN Solution Engine, Release 2.0
The following sections show the devices supported at the time the CiscoWorks Wireless LAN Solution Engine, Release 2.0 was released:
•
Supported Access Points and Bridges
The WLSE provides incremental device support. Select the file containing the updated list of supported access points that is compatible with the WLSE version you are running from the Software Center at: http://www.cisco.com/kobayashi/sw-center/cw2000/crypto/wlan-sol-eng/. To import the updated list of devices to the WLSE, select Administration > System > New Version Support.
To see a list of supported firmware versions, select Administration > System > Firmware Supported Versions.
To see a list of devices discovered by the Wireless LAN Solution Engine, select Administration > Discover > Managed Devices.
Supported Access Points and Bridges
You may use versions not listed in Table 1 with the Configuration and Firmware features, but you must remember to:
•
Deselect Enable Version Checking in Configuration > Template Creation > Finish.
•
Select Ignore Warnings in Firmware > Jobs > Create Job before running the job.
Table 1 Supported Access Points and Bridges
Series SysObjectID Supported Firmware Versions Discovery, Inventory, Faults, Reporting Configuration FirmwareCisco Aironet 1100 series access points
1.3.6.1.4.1.9.1.507
12.2(4)JA,12.2(4)JA1, 12.2(8)JA, 12.2(11)JA
12.2(4)JA, 12.2(4)JA1, 12.2(8)JA, 12.2(11)JA
12.2(4)JA, 12.2(4)JA1, 12.2(8)JA, 12.2(11)JA
Cisco Aironet 1210 and 1230 series (Cisco IOS) access points
1.3.6.1.4.1.9.1.525
12.2(8)JA, 12.2(11)JA
12.2(8)JA, 12.2(11)JA
12.2(8)JA, 12.2(11)JA
Cisco Aironet 1200 and 1220 series access points
1.3.6.1.4.1.9.1.474
11.54T, 11.56, 12.01T1, 12.02T1
11.54T, 11.56,12.01T1, 12.02T1
11.54T, 11.56,12.01T1, 12.02T1
Note
When a 1200 access point is converted from non-IOS to Cisco IOS, its SysObjectID changes to 1.3.6.1.4.1.9.1.525, which corresponds to 1210 and 1230 models (Cisco IOS). Software Images listed for 1210and 1230 models apply to the converted access point.
Cisco Aironet 350 series access points
1.3.6.1.4.1.9.1.380
11.06a, 11.07a, 11.08T1, 11.10T1, 11.21, 11.23T, 12.01T1, 12.02T1
11.21, 11.23T, 12.01T1, 12.02T1
11.06a, 11.07a, 11.08T1, 11.10T1, 11.21, 11.23T, 12.01T1, 12.02T1
Cisco Aironet 340 series access points
1.3.6.1.4.1.9.1.379
11.06a, 11.07a, 11.08T1, 11.10T1, 11.21, 11.23T, 12.01T, 12.02T1
11.21, 11.23T, 12.01T1, 12.02T1
11.06a, 11.07a, 11.08T1, 11.10T, 11.21, 11.23T, 12.01T1, 12.02T1
Cisco Aironet 4800b series access points1
1.3.6.1.4.1.522.2.1.76
11.06a, 11.07a, 11.08T1, 11.10T1, 11.21, 11.23T
11.06a, 11.07a, 11.08T1, 11.10T1, 11.21, 11.23T
11.06a, 11.07a, 11.08T1, 11.10T1, 11.21, 11.23T
Cisco Aironet 350 series bridges
1.3.6.1.4.1.9.1.380
11.06a, 11.07a, 11.08T1, 11.10T1, 11.21, 11.23T, 12.01T, 12.02T1
11.21, 11.23T, 12.01T, 12.02T1
11.06a, 11.07a, 11.08T1, 11.10T, 11.21, 11.23T, 12.01T1, 12.02T1
Cisco Aironet 350 series workgroup bridges2
N/A
Not supported.
Not supported.
Not supported.
1 The 4800b access points are discovered as 350 access points.
2 Workgroup bridges are discovered as clients.
Supported Switches
Note
The WLSE monitors basic MIB-II attributes that are available on all switches. In general, different software versions of these devices will be supported because those attributes are not expected to change.
Table 2 Supported Switches
Series Devices Supported SysObjectIDCisco Catalyst 1200
1200
1.3.6.1.4.1.9.5.5
Cisco Catalyst 1900
1924
1.3.6.1.4.1.9.5.18
1.3.6.1.4.1.9.5.28
1912
1.3.6.1.4.1.9.5.175
1.3.6.1.4.1.9.5.31
Cisco Catalyst 2820
2820
1.3.6.1.4.1.9.5.20
Cisco Catalyst 29001
2980G-A
1.3.6.1.4.1.9.5.51
2980G
1.3.6.1.4.1.9.5.49
2948GL3Dc
1.3.6.1.4.1.9.1.386
2948G
1.3.6.1.4.1.9.5.42
2926
1.3.6.1.4.1.9.5.35
2900
1.3.6.1.4.1.9.5.12
Cisco Catalyst 2900XL2
2908XL
1.3.6.1.4.1.9.1.170
2912XL
1.3.6.1.4.1.9.1.219
2912MFXL
1.3.6.1.4.1.9.1.221
2916MXL
1.3.6.1.4.1.9.1.171
2924XL
1.3.6.1.4.1.9.1.183
2924CXL
1.3.6.1.4.1.9.1.184
2924XLV
1.3.6.1.4.1.9.1.217
2924CXLV
1.3.6.1.4.1.9.1.218
2924MXL
1.3.6.1.4.1.9.1.220
Cisco Catalyst 29503
2950-12
1.3.6.1.4.1.9.1.323
2950-24
1.3.6.1.4.1.9.1.324
2950-24C
1.3.6.1.4.1.9.1.325
2950T
1.3.6.1.4.1.9.1.359
2950-12G
1.3.6.1.4.1.9.1.427
2950-24G
1.3.6.1.4.1.9.1.428
2950-48G
1.3.6.1.4.1.9.1.429
2950-24S
1.3.6.1.4.1.9.1.430
2950-24GDC
1.3.6.1.4.1.9.1.472
Cisco Catalyst 3000 series switches
C3000
1.3.6.1.4.1.9.5.10
1.3.6.1.4.1.9.5.26
C3100
1.3.6.1.4.1.9.5.23
C3200
1.3.6.1.4.1.9.5.15
CPW16
1.3.6.1.4.1.9.5.9
1.3.6.1.4.1.9.5.25
Cisco Catalyst 3500 XL series switches4
3508GXL
1.3.6.1.4.1.9.1.246
3512XL
1.3.6.1.4.1.9.1.247
3524XL,
1.3.6.1.4.1.9.1.248
3548XL
1.3.6.1.4.1.9.1.278
3524PWRXL,
1.3.6.1.4.1.9.1.287
3524PWRXLEn
1.3.6.1.4.1.9.1.515
Cisco Catalyst 3550 series switches5
3550-24
1.3.6.1.4.1.9.1.366
3550-48
1.3.6.1.4.1.9.1.367
3550-12T
1.3.6.1.4.1.9.1.368
3550-12G
1.3.6.1.4.1.9.1.431
3550-24DC
1.3.6.1.4.1.9.1.452
3550-24-MMF
1.3.6.1.4.1.9.1.453
3550-24PWR
1.3.6.1.4.1.9.1.485
Cisco Catalyst 3900 series switches
3900
1.3.6.1.4.1.9.5.33
3920
1.3.6.1.4.1.9.5.37
Cisco Catalyst 4000 switch6
4003
1.3.6.1.4.1.9.5.40
4912G,
1.3.6.1.4.1.9.5.41
4006
1.3.6.1.4.1.9.5.46
4006-SW
1.3.6.1.4.1.9.1.448
4908gL3Dc
1.3.6.1.4.1.9.1.387
4503
1.3.6.1.4.1.9.1.501
Cisco Catalyst 5000 series switches7
2200
1.3.6.1.4.1.9.5.13
5000
1.3.6.1.4.1.9.5.7
5002
1.3.6.1.4.1.9.5.29
Cisco Catalyst 5500 series switches8
5500
1.3.6.1.4.1.9.5.17
5505
1.3.6.1.4.1.9.5.34
5509
1.3.6.1.4.1.9.5.36
Cisco Catalyst 6000 series switches9
6006
1.3.6.1.4.1.9.5.38
6009
1.3.6.1.4.1.9.5.39
6503
1.3.6.1.4.1.9.5.56
6506
1.3.6.1.4.1.9.5.45
6509
1.3.6.1.4.1.9.5.44
6509SP
1.3.6.1.4.1.9.5.47
6513
1.3.6.1.4.1.9.5.50
1 Tested with Software Release 12.0(7)WX5(15a)
2 Tested with Software Release 11.2 (8.5)SA6
3 Tested with Software Release 12.0(5.3)WC(1) and 12.1(9)EA1
4 Tested with Software Release 12.0(5.3)WC(1), 12.0(5.2)XU
5 Tested with Software Release 12.1(6)EA1
6 Tested with Software Release 6.3 (3) and 7.2(2)
7 Tested with Software Release 4.5(3)
8 Tested with Software Release 5.4(1)
9 Tested with Software Releases 6.2(2) and 6.3(1)
Supported Routers
Note
The WLSE monitors basic MIB-II attributes that are available on all switches. In general, different software versions of these devices will be supported because those attributes are not expected to change.
Table 3 Supported Routers
Series Devices Supported SysObjectIDCisco 2600 series routers1
2610
1.3.6.1.4.1.9.1.185
2611
1.3.6.1.4.1.9.1.186
2612
1.3.6.1.4.1.9.1.187
2613
1.3.6.1.4.1.9.1.195
2620
1.3.6.1.4.1.9.1.208
2621
1.3.6.1.4.1.9.1.209
2650
1.3.6.1.4.1.9.1.319
2651
1.3.6.1.4.1.9.1.320
2691
1.3.6.1.4.1.9.1.413
2610XM
1.3.6.1.4.1.9.1.466
2611XM
1.3.6.1.4.1.9.1.467
2620XM
1.3.6.1.4.1.9.1.468
2621XM
1.3.6.1.4.1.9.1.469
2650XM
1.3.6.1.4.1.9.1.470
2651XM
1.3.6.1.4.1.9.1.471
Cisco 3600 series routers2
3620
1.3.6.1.4.1.9.1.122
3640
1.3.6.1.4.1.9.1.110
3660
1.3.6.1.4.1.9.1.205
3661-AC
1.3.6.1.4.1.9.1.338
3661-DC
1.3.6.1.4.1.9.1.339
3662-AC
1.3.6.1.4.1.9.1.340
3662-AC-CO
1.3.6.1.4.1.9.1.342
3662-DC
1.3.6.1.4.1.9.1.341
3662-DC-CO
1.3.6.1.4.1.9.1.343
1 Tested with Cisco IOS Software Release 12.2(1)
2 Tested with Cisco IOS Software Release 12.0(5)XK
Supported Access Servers
Table 4 Supported Access Servers
Devices Supported Versions Discovery, Inventory, Faults, Reporting Configuration and FirmwareLEAP, PEAP, RADIUS, and EAP-MD5 servers
Cisco Secure Access Control Server (ACS), Versions 2.6.x, 3.0.x, 3.1.x, and 3.21
Not supported.
Cisco Access Registrar
Cisco Access Registrar (CAR), Version 1.7 and 3.0
Not supported.
1 Cannot be used for PEAP servers.

