Cisco® announces the end-of-sale and end-of life dates for the Cisco 2600/3600/3700 Series ATM OC-3 155-Mbps Network Modules. The last day to order the affected product(s) is April 30, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco 2600/3600/3700 Series ATM OC-3 155-Mbps Network Modules
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
October 31, 2007
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
April 30, 2008
Last Ship Date HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
July 29, 2008
End of Routine Failure Analysis Date HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
April 30, 2009
End of New Service Attachment Date HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
April 30, 2009
End of Service Contract Renewal Date HW
The last date to extend or renew a service contract for the product.
July 26, 2012
Last Date of Support HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
April 29, 2013
HW = Hardware
OS SW = Operating System Software
App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
NM-1A-OC3MM
One-port ATM OC-3 Multimode NM for 2691,3600,3725
NM-1A-OC3-POM
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3MM=
One-port ATM OC-3 Multimode NM for 2691,3600, 3725
NM-1A-OC3-POM=
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3MM-EP
1-Port OC-3 Multimode ATM Enhanced performance NM for 3745
NM-1A-OC3-POM
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3MM-EP=
1-Port OC-3 Multimode ATM Enhanced performance NM for 3745
NM-1A-OC3-POM=
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3SMI
One-port ATM OC-3 Singlemode Inter Reach NM 2691,3600,3725
NM-1A-OC3-POM
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3SMI=
One-port ATM OC-3 Singlemode Inter Reach NM 2691,3600,3725
NM-1A-OC3-POM=
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3SMI-EP
1-Port OC-3 ATM Enhanced perf Singlemode Int Reach NM 3745
NM-1A-OC3-POM
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3SMI-EP=
1-Port OC-3 ATM Enhanced perf Singlemode Int Reach NM 3745
NM-1A-OC3-POM=
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3SML
One-port ATM OC-3 Singlemode Long Reach NM 2691,3600,3725
NM-1A-OC3-POM
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3SML=
One-port ATM OC-3 Singlemode Long Reach NM 2691,3600,3725
NM-1A-OC3-POM=
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3SML-EP
1-Port OC-3 ATM Enhanced Perf Singlemode Long NM 3745
NM-1A-OC3-POM
ATM OC3 module with single POM (SFP) slot
NM-1A-OC3SML-EP=
1-Port OC-3 ATM Enhanced Perf Singlemode Long NM 3745
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the end-of-sale product through the Cisco Certified Refurbished Equipment program. Refurbished units of the end-of-sale product are available in limited supply for sale in certain countries on a first-come, first-served basis. For information about the refurbished equipment program, go to http://cisco.com/go/remarketing.
