Guest

Cisco Line Cards

Cisco 12000 Series Packet over SONET/SDH (POS) Line Cards

Data Sheet

The Cisco® 12000 Series of packet over SONET/SDH (POS) line cards deliver state-of-the-art technology to cost-effectively scale carrier-class IP/Multiprotocol Label Switching (MPLS) packet infrastructures to meet the needs of service providers around the world (Figures 1 and 2). The POS interfaces deliver high-performance, powerful features and a full range of interface types, speeds, and connectors, enabling deployment of high-speed core, peering, and edge applications. The POS line cards provide the ideal solution to meet and exceed the ever-growing demands for higher capacity and service availability.

CISCO ISE POS INTERFACES-DELIVERING ROBUST HIGH-SPEED EDGE FUNCTIONS

Service providers face the challenge of meeting customer demand by building scalable, feature-rich networks that can deliver value-added services such as private IP connectivity; integrated data, voice, and video services; and tiered service offerings-at all interface rates without compromising density or line-rate performance. The Cisco IP Services Engine (ISE) line cards provide the same powerful feature set as the standard POS line cards and also accommodate service provider requirements by providing an extensive set of service-enabling edge features at line rate such as packet classification, congestion avoidance, and low-latency queuing (LLQ).

Figure 1. Cisco 12000 Series 1-Port OC-48c/STM-16c POS ISE Line Card

Figure 2. Cisco 12000 Series 16-, 8-, and 4-Port OC-3c/STM-1c POS ISE Line Cards

PRODUCT FEATURES

Table 1 describes the basic features on the Cisco 12000 Series POS line cards.

Table 1. Product Features

Feature

Description

Performance
• Line-rate throughput for IP forwarding and MPLS switching
• Performance sustained in fully loaded system
• No performance drops as quality-of-service (QoS) or accounting features are enabled
Reliability and Availability
• Online insertion and removal (OIR) enabling insertion and removal of line cards without affecting traffic
• Mean time between failure (MTBF) more than 80,000 hours
Network Management
• Cisco IOS® Software command-line interface (CLI)
• Cisco 12000 Manager for configuration, fault, and performance element management
• Simple Network Management Protocol (SNMP) MIBs:
· SONET/SDH MIB (RFC 2558)
· MIB-II
Statistics and Accounting
• Byte and packet counting per ingress port for IP and MPLS packets
• Byte and packet counting per ingress port for IP and MPLS type-of-service (ToS) bits
• Packet counting for Modified Deficit Round Robin (MDRR) and Weighted Random Early Detection (WRED) functions
• Packet and byte counting for committed-access-rate (CAR) feature
• Counting per ingress port for IP prefixes and Cisco Express Forwarding adjacencies
SONET/SDH Functions
• Error counts for B1, B2, and B3
• Threshold crossing alerts (TCAs), far end block error path (FEBE) for B1, B2, and B3 with threshold that can be set
• Loss of signal (LOS), loss of frame (LOF), line alarm indicator signal (LAIS), path alarm indicator signal (PAIS), loss of pointer (LOP), line remote defect indicator (LRDI), path remote defect indicator (PRDI), signal failure (SF), signal degrade (SD), line remote error indicator (line FEBE), and path remote error indicator (path FEBE)
• Performance monitoring: Error counts for B1, B2, and B3; TCAs; and FEBE for B1, B2, and B3 with threshold that can be set
• Synchronization
· Local (internal) or loop timed (recovered from network)
· Stratum 3 clock accuracy over full operating temperature
· Pointer activity monitoring
• Local (diagnostic) and line (network) loopback
• Payload mapping
· 1 + X43 self-synchronous scrambler

PRODUCT SPECIFICATIONS

Table 2 provides specifications for the different Cisco 12000 Series POS line cards.

Table 2. Product Specifications

Line Card and Description

Forwarding Engine

Cisco IOS Software Release

Chassis Supported

Per-Chassis Port Densities

Per-Rack Port Densities

2-Port OC-192c POS
2-Port OC-192c/STM-64c POS

Engine 6

• 12.0(27)S
• Cisco 12816
• Cisco 12810
• 30 ports
• 18 ports
• 30 ports
• 36 ports
1-Port OC-192c POS ES
1-Port OC-192c/STM-64c POS ES

Engine 4+

• 12.0(21)S
• 12.0(21)ST
• Cisco 12416
• Cisco 12816
• Cisco 12410
• Cisco 12810
• Cisco 12406
• Cisco 12404
• 15 ports
• 15 ports
• 9 ports
• 9 ports
• 5 ports
• 3 ports
• 15 ports
• 15 ports
• 18 ports
• 18 ports
• 20 ports
• 24 ports
8-Port OC-48c POS
8-Port OC-48c/STM-16c POS

Engine 6

• 12.0(27)S
• Cisco 12816
• Cisco 12810
• 120 ports
• 72 ports
• 120 ports
• 144 ports
4-Port OC-48c POS ES
4-Port OC-48c/STM-16c POS ES

Engine 4+

• 12.0(21)S
• 12.0(21)ST
• Cisco 12416
• Cisco 12816
• Cisco 12410
• Cisco 12810
• Cisco 12406
• Cisco 12404
• 60 ports
• 60 ports
• 36 ports
• 36 ports
• 20 ports
• 12 ports
• 60 ports
• 60 ports
• 72 ports
• 72 ports
• 80 ports
• 96 ports
1-Port OC-48c POS ISE
1-Port OC-48c/STM-16c POS ISE

Engine 3

• 12.0(21)S
• 12.0(21)ST
• Cisco 12x16
• Cisco 12x10
• Cisco 12x06
• Cisco 12x04
• 15 ports
• 9 ports
• 5 ports
• 3 ports
• 15 ports
• 18 ports
• 20 ports
• 24 ports
4-Port OC-12c POS ISE
4-Port OC-12c/STM-4c POS ISE

Engine 3

• 12.0(21)S
• 12.0(21)ST
• Cisco 12x16
• Cisco 12x10
• Cisco 12x06
• Cisco 12x04
• 60 ports
• 36 ports
• 20 ports
• 12 ports
• 60 ports
• 72 ports
• 80 ports
• 96 ports
16-Port OC-3c POS ISE
16-Port OC-3c/STM-1c POS ISE

Engine 3

• 12.0(21)S
• 12.0(21)ST
• Cisco 12x16
• Cisco 12x10
• Cisco 12x06
• Cisco 12x04
• 240 ports
• 144 ports
• 80 ports
• 48 ports
• 240 ports
• 288 ports
• 320 ports
• 384 ports
8-Port OC-3c POS ISE
8-Port OC-3c/STM-1c POS ISE

Engine 3

• 12.0(22)S
• Cisco 12x16
• Cisco 12x10
• Cisco 12x06
• Cisco 12x04
• 120 ports
• 72 ports
• 40 ports
• 24 ports
• 120 ports
• 144 ports
• 160 ports
• 192 ports
4-Port OC-3c POS ISE
4-Port OC-3c/STM-1c POS ISE

Engine 3

• 12.0(22)S
• Cisco 12x16
• Cisco 12x10
• Cisco 12x06
• Cisco 12x04
• 60 ports
• 36 ports
• 20 ports
• 12 ports
• 60 ports
• 72 ports
• 80 ports
• 96 ports

PHYSICAL AND ELECTRICAL SPECIFICATIONS

Table 3 provides details about the physical and electrical specifications of the different Cisco 12000 Series POS line cards.

Table 3. Physical and Electrical Specifications

Line Card

Dimensions

Weight

Power

Route Memory (default and maximum)

LEDs

2-Port OC-192c POS
• Height: 14.5 in. (36.5 cm)
• Depth: 18 in. (45.7 cm)

9.51 lb (4.32 kg)

174W Maximum

• Default: 512 MB
• Maximum: 512 MB
• Enable
• Receive carrier
• Receive packets
• Alphanumeric management display
1-Port OC-192c POS ES
• Height: 14.5 in. (36.5 cm)
• Depth: 18 in. (45.7 cm)

9.51 lb (4.32 kg)

174W Maximum

• Default: 256 MB
• Maximum: 512 MB
• Enable
• Receive carrier
• Receive packets
• Alphanumeric management display
8-Port OC-48c POS
• Height: 14.5 in. (36.5 cm)
• Depth: 18 in. (45.7 cm)

9.51 lb (4.32 kg)

174W Maximum

• Default: 512 MB
• Maximum: 512 MB
• Enable
• Receive carrier
• Receive packets
• Alphanumeric management display
4-Port OC-48c POS ES
• Height: 14.5 in. (36.5 cm)
• Depth: 18 in. (45.7 cm)

10.21 lb (4.64 kg)

214W Maximum

• Default: 256 MB
• Maximum: 512 MB
• Enable
• Receive carrier
• Receive packets
• Alphanumeric management display
1-Port OC-48c POS ISE
• Height: 14.5 in. (36.5 cm)
• Depth: 18 in. (45.7 cm)

6.0 lb (2.7 kg)

140W Maximum

• Default: 256 MB
• Maximum: 1 GB
• Enable
• Receive carrier
• Receive packets
• Alphanumeric management display
4-Port OC-12c POS ISE
• Height: 14 in. (35.6 cm)
• Depth: 18 in. (45.7 cm)

6.0 lb (2.7 kg)

140W Maximum

• Default: 256 MB
• Maximum: 1 GB
• Enable
• Receive carrier
• Receive packets
• Alphanumeric management display
16-Port OC-3c POS ISE
• Height: 14.5 in. (36.5 cm)
• Depth: 18 in. (45.7 cm)

6.0 lb (2.7 kg)

196W Maximum

• Default: 256 MB
• Maximum: 1 GB
• Enable
• Receive carrier
• Receive packets
• Alphanumeric management display
8-Port OC-3c POS ISE
• Height: 14.5 in. (36.5 cm)
• Depth: 18 in. (45.7 cm)

6.0 lb (2.7 kg)

196W Maximum

• Default: 256 MB
• Maximum: 1 GB
• Enable
• Receive carrier
• Receive packets
• Alphanumeric management display
4-Port OC-3c POS ISE
• Height: 14.5 in. (36.5 cm)
• Depth: 18 in. (45.7 cm)

6.0 lb (2.7 kg)

196W Maximum

• Default: 256 MB
• Maximum: 1 GB
• Enable
• Receive carrier
• Receive packets
• Alphanumeric management display

OPTICAL SPECIFICATIONS

Table 4 provides details about the optical specifications of the different Cisco 12000 Series POS line cards.

Table 4. Optical Specifications

Line Card

Tx

Power

Rx

Power

Po (dB)

DSRmax* ps/nm

Target Distance (km)**

Rx Wavelength (nm)

Tx Wave-length (nm)

Fiber Type***

Compliance****

 
PTmax (dBm)
PTmin (dBm)
PRmax (dBm)
PRmin (dBm)
           
Telcordia
ITU
OC-192

GR-253

G.691

OC-192 SR-1

-1

-6

-1

-11

1

6.6

2

1260-1600

1290-1330

G.652

SR-1

I-64.1

OC-192 IR

2

-1

-1

-14

2

800

40

1260-1600

1530-1565

G.652

IR-2

S-64.2b

OC-192 LR

7

4

-9

-22

2

1600

80

1260-1600

1530-1565-

G.652

Cisco LR

S-64.2b

OC-48

GR-253

G.957

OC-48/POS-SR-xx and OC-48/SRP-SR-SC

-3

-10

-3

-18

1

12

2

1260-1600

1266-1360

G.652

SR-1

I-16

OC-48/POS-1550-xx***** and OC-48/SRP-LR-SC

+3

-2

-9

-28

2

1600

80

1260-1600

1500-1580

G.652 G.654***

LR-2

L-16.2

OC-48 Pluggable Optic Modules

POM-OC48-SR-LC

-3