The Cisco MGX® 8800/8900 Series Switches provide the industry's most scalable family of multiservice switches, scaling from 1.2 Gbps to 180 Gbps redundant switching capacity and from DS0 to OC-192/STM-64 interface capacity. This scalability provides exceptional savings and efficiency for network operations and services growth. The Cisco® MGX 8800/8900 Series includes the Cisco MGX 8830/B, MGX 8850, MGX 8850/B, and MGX 8950 Multiservice Switches.
The Cisco 16-Port OC-3c/STM-1 ATM Switch Service Module is a line card for use in the Cisco MGX 8800/8900 Series multiservice Cisco MGX Switches in combination with the Cisco MGX 8800/8900 Series PXM-45 Processor Switch Module and the Cisco MGX 8950 XM-60 Switching Module (the latter for use on the Cisco MGX 8950 only). This ATM switch service module has 16 physical 155-Mbps interfaces that can be used to deliver high-density OC-3c or STM-1 trunking and User-Network Interface (UNI).
Up to 12 Cisco 16-port OC-3c/STM-1 ATM Switch Service Modules can reside in the Cisco MGX 8850, MGX 8850/B, or MGX 8950 to provide support for up to 192 OC-3c/STM-1 interfaces for service providers that require both high bandwidth and high network availability.
The Cisco 16-Port OC-3c/STM-1 ATM Switch Service Module meets service providers' demand for carrier-class availability by offering hot-standby 1+1 card redundancy as well as port redundancy with SONET/SDH automatic protection switching (APS). (See Figure 1.)
Figure 1. Cisco MGX 8800/8900 Series 16-Port OC-3c/STM-1 ATM Switch Service Module
Key Features
The main features of the Cisco MGX 8800/8900 16-Port OC-3c/STM-1 ATM Switch Service Module are listed here.
• Full nonblocking, full-duplex line-rate throughput on all 16 ports
• High reliability with hot-standby 1+1 16-port ATM switch service module card redundancy
• Per-virtual-path and per-virtual-circuit traffic shaping and available bit rate (ABR) with virtual source and virtual destination
• Y-cable and APS (1:1 and 1+1) port redundancy, plus APS 1+1 card redundancy
• Up to 4 million cell buffers
• Up to 16 classes of service (CoS) that can be used to support IP or ATM services
• Support for standards-based Private Network-to-Network Interface (PNNI), switched virtual circuit (SVC) and switched virtual path (SVP), soft permanent virtual connection (SPVC) and soft permanent virtual path (SPVP), and Multiprotocol Label Switching (MPLS) services
Technical Specifications
Table 1 lists the specifications for the Cisco 16-Port OC-3c/STM-1 ATM Switch Service Module.
Table 1. Product Specifications
Description
Specification
Chassis Compatibility
Cisco MGX 8830/B, MGX 8850, MGX 8850/B, and MGX 8950
Software Compatibility
Cisco MGX 8800/8900 SW Release 5.0.20 and above
Protocols
ATM and SONET/SDH
Port Density
16 ports
Layer 1 (Physical Layer) Feature Summary
• Support for ports and trunks on the same Cisco 155-Mbps 16-port ATM switch service module
• UNI 3.0, 3.1, and 4.0 physical layer specifications
Additional Physical Layer Specifications for Ports and Optics
Connection Options
MMF1
SMF-IR2
SMF-LR3
Port speed
155 Mbps
155 Mbps
155 Mbps
Number of ports per Cisco MGX 8800/8900 Series 16-Port OC-3c/STM-1 ATM Switch Service Module
16
16
16
Port media
MMF
SMF
SMF
Port connector
LC
LC
LC
Optics (nanometers- [nm])
Laser 1310 nm
Laser 1310 nm
Laser 1310 nm
Transmit power level (decibels per milliwatt [dBm])
-15 minimum and
-8 maximum
-15 minimum and
-8 maximum
-5 minimum and
-0 maximum
Receive power level (dBm)
-23 minimum and
-8 maximum
-28 minimum and
-8 maximum
-34 minimum and
-8 maximum
Typical reach
200 meters [218 yards) with 62.5 micrometer core) and 500 meters [545 yards] with 50 micrometer core
15 km [9.3 mi]
40 km [24.85 mi]
Redundancy
1+1 and 1:1 APS line
1+1 and 1:1 APS line
1+1 and 1:1 APS line
1Multimode fiber
2Single-mode fiber, short reach
3Single-mode fiber, long reach
Layer 2 (ATM) Feature Summary
• Configurable for trunk, Network-to-Network Interface (NNI), or UNI application
• Conformant to ATM Forum UNI 3.0, 3.1, and 4.0 and ITU-T I.361 and I.432 specifications
• Supports up to 16 CoS queues for IP and ATM traffic and includes all ATM Forum traffic-type services: ABR, unspecified bit rate (UBR), non-real-time variable bit rate (VBR-nrt), real-time variable bit rate (VBR-rt), constant bit rate (CBR); ABR supported with explicit forward congestion indicator (EFCI), RM marking, and explicit-rate stamping; supports ABR virtual source and destination
• Supports Integrated Local Management Interface (ILMI) 4.0
• Complies with standard usage parameter control (UPC) as specified by ATM Forum UNI 3.0 and 4.0, TM 4.1, and ITU-T I.371
• Supports early packet discard (EPD), Weighted Random Early Detection (WRED), and partial packet discard (PPD)
• Supports up to 128,000 connections per 16-port ATM switch service module controlled by PNNI
• Supports virtual path identifier (VPI) and virtual circuit identifier (VCI) range for VCCs and VPCs per UNI 3.1
• Supports virtual circuit merge, per-virtual-circuit and per-virtual-path shaping, and multipoint connections
Virtual trunks
• Supports a maximum of 128 virtual interfaces per module; the interfaces can be ports, trunks, or virtual trunks, and each virtual interface supports 16 CoS queues
Cell buffering
• Supports 4 million cells of buffering to accommodate large traffic bursts and avoid network congestion and cell discard; suitable for TCP/IP traffic
Support for dynamic routing using PNNI 1.0
• Offers an automatic end-to-end connection management mechanism
• Deterministically allocates bandwidth and reroutes connections autonomously over optimum network paths
• Preserves service integrity during network failure
• Offers E.164 and network-service-access-point (NSAP) addressing
• Offers support for SVC and SVP and for SPVC and SPVP
• Offers quality-of-service (QoS) based routing
Enhanced call admission control
• A user-programmable Enhanced Call Admission Control (E-CAC) feature determines whether to admit or deny connections based on the requested QoS.
Layer 2 (ATM) Feature Summary (continued)
Statistics
• Statistics supported per connection
• Diagnostic statistics available per interface and CoS queues
Operation, administration, and management
• F4 to F5 fault propagation
• In-band diagnostics support using loopback cells
• In-band continuity check and automatic fault reporting for PVCs
• Loopback facility support for diagnostics and self-test purposes
Network Management
• Managed by Cisco WAN Manager software suite
• Based on Simple Network Management Protocol (SNMP)
Power
• Input power required: -48 VDC
• Power consumption: 114W
Physical Dimensions
H x D: 15.83 x 15.65 in. (40.20 x 39.75 cm)
Weight
6.5 lb (2.95 kg)
Environmental Conditions
• Storage temperature: -40 to 158°F (-40 to 70°C)
• Operating temperature:
• Normal: 41 to 104°F (5 to 40°C)
• Short term: 23 to 122°F (-5 to 50°C)
• Relative humidity:
• Normal: 5 to 85%
• Short term: 5 to 90% but not to exceed 0.024 kg (0.048 lb) of water per kg (lb) of dry air
Short term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year
Approvals and Compliance
Table 2 lists regulatory information.
Table 2. Compliance and Agency Approvals
Compliance Type
Description
Safety standards
• UL/CSA/IEC/EN 60950-1
• IEC/EN 60825 Laser Safety
• ACA TS001
• AS/NZS 60950
• FDA-Code of Federal Regulations Laser Safety
EMI
• FCC Class A
• ICES 003 Class A
• AS/NZS 3548 Class A
• CISPR 22 (EN55022) Class A
• VCCI Class A
• BSMI Class A
• IEC/EN 61000-3-2: Power Line Harmonics
• IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
