Cisco Systems® announces the end-of-sale and end-of life dates for the Cisco PGW 2200 Specified Hardware. The last day to order the Cisco PGW 2200 Specified Hardware is April 27, 2007. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the Cisco PGW 2200 Specified Hardware. Table 2 lists the product part numbers affected by this announcement.
Table 1. End-of-Life Milestones and Dates for the Cisco PGW 2200 Specified Hardware
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
April 23, 2007
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
April 27, 2007
Last Ship Date:
HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
July 27, 2007
End of Routine Failure Analysis Date:
HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
April 27, 2008
End of New Service Attachment Date:
HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
April 27, 2008
End of Service Contract Renewal Date:
HW
The last date to extend or renew a service contract for the product.
July 27, 2011
Last Date of Support:
HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
April 27, 2012
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
Customers with Cisco PGW 9.6(1),H.323 signaling interface (HSI) 4.2,and Billing and Measurements Server 3.20 will need to order Netra 240s as replacement (HSI application will require one processor to be disabled). Customers using 9.7(3),HSI 4.3 and BAM 3.30 will need to order Netra 210s as replacement.
For More Information
For more information about the Sun Netra 210 or Sun Netra 240, visit http://www.sun.com, contact your local account representative, or send an e-mail to pgw-tme@cisco.com.
