Document ID: 47886
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Technical Specifications
Related Information
Introduction
This document provides the technical specifications for the CAB-25AS-MMOD adapter.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Technical Specifications
This illustration shows adapter CAB-25AS-MMOD (part number CAB-25AS-MMOD). This adapter is used with the Cisco 2500 series, including the access server series (Cisco 2509 through Cisco 2512).
This adapter has an RJ-45 connector on one end and a male DB-25 connector on the other end.
This table lists the pins for the RJ-45 and MMOD:
|
Cable |
DB-25 Adapters |
|
|---|---|---|
|
RJ-45 Pins |
MMOD Pins1 |
|
|
1 |
5 |
|
|
2 |
8 |
|
|
3 |
3 |
|
|
4 |
7 |
|
|
5 |
7 |
|
|
6 |
2 |
|
|
7 |
20 |
|
|
8 |
4 |
|
1The MMOD adapter that is available through Cisco is labeled "Modem."
Related Information
| Updated: Jan 27, 2006 | Document ID: 47886 |