Guest

Cisco 7000 Series Routers

5-in-1 X.21 Assembly and Pinouts

Document ID: 12225



Contents

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
X.21 Cable Assembly
X.21 DTE Cable Pinouts (DB-60 to DB-15)
X.21 DCE Cable Pinouts (DB-60 to DB-15)
NetPro Discussion Forums - Featured Conversations
Related Information

Introduction

This document describes the X.21 cable assembly and pinouts (Data Terminal Equipment - DTE and Data Communications - DCE).

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

X.21 Cable Assembly

/images/tech_H1974.gif

X.21 DTE Cable Pinouts (DB-60 to DB-15)

The arrows in this table indicate signal direction:

  • --> indicates DTE to DCE

  • <-- indicates DCE to DTE

  • -- means direction not applicable

60 Pin*1*

Signal

Description

Direction

15 Pin

Signal

J1-48

J1-47

GND

MODE_2

Shorting Group

--

--

--

J1-51

J1-52

GND

MODE_DCE

Shorting Group

--

--

--

J1-46

Shield_GND

--

Single

--

J2-1

Shield GND

J1-11

J1-12

TxD/RxD+

TxD/RxD--

Twisted pair no. 3

-->

-->

J2-2

J2-9

Transmit+

Transmit--

J1-9

J1-10

RTS/CTS+

RTS/CTS--

Twisted pair no. 2

-->

-->

J2-3

J2-10

Control+

Control--

J1-28

J1-27

RxD/TxD+

RxD/TxD--

Twisted pair no. 6

<--

<--

J2-4

J2-11

Receive+

Receive--

J1-1

J1-2

CTS/RTS+

CTS/RTS--

Twisted pair no. 1

<--

<--

J2-5

J2-12

Indication+

Indication--

J1-26

J1-25

RxC/TxCE+

RxC/TxCE--

Twisted pair no. 5

<--

<--

J2-6

J2-13

Timing+

Timing--

J1-15

Shield

Control_GND

--

Twisted pair no. 4

--

--

J2-8

Shield

Control GND

--

*1* Any pin not referenced is not connected.

X.21 DCE Cable Pinouts (DB-60 to DB-15)

60 Pin*1*

Signal

Description

Direction

15 Pin

Signal

J1-48

J1-47

GND

MODE_2

Shorting Group

--

--

--

J1-46

Shield_GND

Single

--

--

--

J1-46

Shield_GND

--

Single

--

J2-1

Shield GND

J1-28

J1-27

RxD/TxD+

RxD/TxD--

Twisted pair no. 6

<--

<--

J2-2

J2-9

Transmit+

Transmit--

J1-1

J1-2

CTS/RTS+

CTS/RTS--

Twisted pair no. 1

<--

<--

J2-3

J2-10

Control+

Control--

J1-11

J1-12

TxD/RxD+

TxD/RxD--

Twisted pair no. 3

-->

-->

J2-4

J2-11

Receive+

Receive--

J1-9

J1-10

RTS/CTS+

RTS/CTS--

Twisted pair no. 2

-->

-->

J2-5

J2-12

Indication+

Indication--

J1-24

J1-23

TxC/RxC+

TxC/RxC--

Twisted pair no. 4

-->

-->

J2-6

J2-13

Timing+

Timing--

J1-15

Shield

Control_GND

--

Twisted pair no. 5

--

--

J2-8

Shield

Control GND

--

*1* Any pin not referenced is not connected.

NetPro Discussion Forums - Featured Conversations

Networking Professionals Connection is a forum for networking professionals to share questions, suggestions, and information about networking solutions, products, and technologies. The featured links are some of the most recent conversations available in this technology.
NetPro Discussion Forums - Featured Conversations for Router and IOS Architecture
Network Infrastructure: LAN Routing and Switching
Network Infrastructure: WAN Routing and Switching

Related Information



Updated: Mar 04, 2008Document ID: 12225