Guest

Cisco 7600 Series Routers

Cisco IOS Release 12.2(13)ZC Supports Cisco 6500/7600 CMM

Table Of Contents

Product Bulletin No. 2242

Introduction

Features in Cisco IOS Release 12.2(13)ZC

Detailed Information

H.323 Support for VoIP Gateways

E1 R2 Signaling

Survivable Remote Site Telephony (SRST)

MGCP Gateway Fall back

Product Numbers

Download Information


Product Bulletin No. 2242


Cisco Catalyst 6500 and Cisco 7600 Series Communication Media Module (CMM) VoIP Gateway IOS Release 12.2(13)ZC

Introduction

This Product Bulletin describes the content and delivery information concerning Cisco IOS(TM) software release 12.2(13)ZC. This release is focused on the Catalyst 6500 and Cisco 7600 series platform. 12.2(13)ZC is an Early Deployment (ED) release parented to 12.2(13)T and supporting the Cisco Catalyst 6500 and Cisco 7600 Communication Media Module (CMM) line card. This release introduces IOS support for several new features including H.323 protocol and Survivable Remote Site Telephony (SRST). The new Cisco IOS™ software release supports all of the currently supported features in 12.2(11)ZC and earlier releases.

Features in Cisco IOS Release 12.2(13)ZC

The following features are supported on the Cisco CMM in release 12.2(13)ZC:

1. H.323 support for VoIP Gateways

2. E1-R2 signaling with H.323

3. SRST

4. MGCP Gateway Fall back

Detailed Information

H.323 Support for VoIP Gateways

The Cisco CMM line card can be configured as H.323 VoIP gateway with Cisco CallManager using ISDN Primary Rate Interface (PRI) for T1 and E1 to provide call processing support. CMM will provide ISDN PRI support for both network and user side signaling. In addition the release of Cisco IOS software also adds support for T1 Channel Associated Signaling (CAS).

E1 R2 Signaling

The Cisco CMM now supports E1 R2 signaling when configured as H.323 gateway. The E1 R2 signaling an international signaling standard common to channelized E1 networks. A number of countries and geographic regions implement R2 in different ways from the standard. Cisco Systems addresses this challenge by supporting many localized implementations of R2 signaling in its Cisco IOS software.

Survivable Remote Site Telephony (SRST)

SRST allows Cisco CMM module to manage connections temporarily for Cisco IP Phones when a connection to a Cisco CallManager (CCM) is unavailable. The SRS Telephony feature provides CCM with fallback support for Cisco IP phones attached to a Cisco router or switch on the local network. The SRS Telephony feature enables CMM to provide call-handling support for Cisco IP phones when they lose connection to remote primary, secondary, or tertiary CCM installations, or when the WAN connection is down.

MGCP Gateway Fall back

MGCP gateway fallback is a feature that improves the reliability of MGCP branch networks. A WAN link connects the MGCP gateway at a remote site to the Cisco CallManager at a central site, which is the MGCP call agent. If the WAN link fails, the fallback feature keeps the gateway working as an H.323 gateway and re-homes back to MGCP call agent when the WAN link comes up. MGCP gateway fallback works in conjunction with the SRST feature.

Product Numbers

Platform
Software Feature
Product Code
Image
Flash
SDRAM

CMM

MGCP/H323 VOIP Gateway

S6CMVG3-12213ZC

wscmm-i6s-mz.122-13.zc

32MB

256MB


Download Information

Customers can download Cisco IOS Release 12.2(13)ZC software from Cisco Connection Online (CCO) in the software image library.

http://www.cisco.com/public/sw-center/sw-ios.shtml