Table Of Contents
August 01, 2005
Readme for Campus Manager 4.0 Service Pack 2 (Solaris)
Description
Related Documentation
Hardware and Software Requirements
CM 4.0 SP 2 Upgrade Path
Patches Rolled Into Campus Manager 4.0 SP 2
Supported Devices in Campus Manager 4.0 SP 2
Downloading Campus Manager 4.0 SP 2
Downloading From Cisco.com
Downloading From CiscoWorks Software Center
Installing Campus Manager 4.0 SP 2
Uninstalling Campus Manager 4.0 SP 2
Reinstalling Campus Manager 4.0 SP 2
Known Problems in Campus Manager 4.0 SP
Resolved Problems in Campus Manager 4.0 SP 2
Frequently Asked Questions
August 01, 2005
Readme for Campus Manager 4.0 Service Pack 2 (Solaris)
This Readme is for Campus Manager 4.0 Service Pack 2 on Solaris. It contains:
•
Description
• Related Documentation
• Hardware and Software Requirements
• Patches Rolled Into Campus Manager 4.0 SP 2
• Supported Devices in Campus Manager 4.0 SP 2
• Downloading Campus Manager 4.0 SP 2
• Installing Campus Manager 4.0 SP 2
• Uninstalling Campus Manager 4.0 SP 2
• Reinstalling Campus Manager 4.0 SP 2
• Known Problems in Campus Manager 4.0 SP
• Resolved Problems in Campus Manager 4.0 SP 2
• Frequently Asked Questions
Description
Campus Manager 4.0 Service Pack 2 is a cumulative device update for
Campus Manager 4.0. In addition to the devices supported, this package contains fixes to known problems, as well as fixes to newly discovered problems.
Note You should print out and read this document before installing
Campus Manager 4.0 SP 2.
This package also supports Cisco CallManager 4.0.
Related Documentation
Table 2 lists the devices supported in Campus Manager 4.0 SP 2.
A list of all devices supported in Campus Manager 4.0 is available on Cisco.com. To access this, go to: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/
camp_4x/cmgr_4_0/cm40sdt.htm.
For a list of fixes to known problems, see the "Resolved Problems in Campus Manager 4.0 SP 2" section.
A list of all known and resolved problems in Campus Manager 4.0, including the patches containing fixes for known problems rolled into SP, is available on Cisco.com. To access this, go to: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/
camp_4x/cmgr_4_0/rel_note/cm40rns.htm.
Note We sometimes update the printed and electronic documentation after original publication. Therefore, we recommend that you also review other documentation for Campus Manager 4.0 on Cisco.com for any updates.
Hardware and Software Requirements
Campus Manager 4.0 Service Pack 2 requires CiscoWorks Common Services 3.0 and Campus Manager 4.0.
Hardware and software requirements are the same as those needed for initial CiscoWorks Common Services 3.0 and Campus Manager 4.0 installation. For a detailed list of requirements as well as instructions on installation of CiscoWorks Common Services 3.0 and Campus Manager 4.0, go to Cisco.com:
For documentation on CiscoWorks Common Services 3.0, go to: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cw2000_d/
comser30/ig_sol/index.htm.
For documentation on Campus Manager 4.0, go to: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/
camp_4x/cmgr_4_0/sol_inst/index.htm.
CM 4.0 SP 2 Upgrade Path
Use the table below to verify the upgrade path to Campus Manager 4.0 SP 2:
If you have installed...
|
You must install...
|
CM3.3+IDU4.0
|
CM4.0 + CS 3.0 SP2 + CM 4.0 SP 2
|
CM3.3+IDU5.0
|
CM4.0 + CS 3.0 SP2 + CM 4.0 SP 2
|
CM3.3+IDU5.0+JPI
|
CM4.0 + CS 3.0 SP2 + CM 4.0 SP 2
|
CM3.3+IDU5.0+JPI+IDU6.0
|
CM4.0 + CS 3.0 SP2 + CM 4.0 SP 2
|
CM3.3+IDU5.0+JPI+IDU7.0
|
CM4.0 + CS 3.0 SP2 + CM 4.0 SP 2
|
CM3.3+IDU5.0+JPI+IDU8.0
|
CM4.0 + CS 3.0 SP2 + CM 4.0 SP 2
|
CM3.3+IDU5.0+JPI+IDU9.0
|
CM4.0 + CS 3.0 SP2 + CM 4.0 SP 2
|
CM3.3+IDU5.0+JPI+IDU10.0
|
CM4.0 + CS 3.0 SP2 + CM 4.0 SP 2
|
CM3.3+IDU5.0+JPI+IDU11.0
|
CM4.0 + CS 3.0 SP2 + CM 4.0 SP 2
|
CM4.0
|
CS 3.0 SP2 + CM 4.0 SP 2
|
CM4.0+CM4.0 SP 1
|
CS 3.0 SP2 + CM 4.0 SP 2
|
Patches Rolled Into Campus Manager 4.0 SP 2
Table 1 lists the patches containing fixes for the bugs rolled into Campus Manager 4.0 SP 2.
Table 1 Patches Rolled Into Campus Manager 4.0 SP 2
Bug ID
|
Summary
|
CSCsa78413
|
Campus Manager did not display hostnames for devices or end hosts when CiscoWorks was running on Windows 2003, although DNS support was configured correctly.
|
CSCsa82974
|
User Tracking searches were case sensitive in Campus Manager 4.0 and in later versions
|
CSCsa83453
|
User Tracking did not display all entries for non-admin users.
|
CSCsa96627
|
User Interface of Campus Manager did not get updated.
|
CSCsa78456
|
Campus Discovery overwrote the display name of the device in the Device Credentials Repository.
|
CSCsa97100
|
UserTracking reports in Campus Manager 4.0 showed incorrect entries for the Last Seen timestamps.
|
CSCsb05349
|
Even after changing the device IP address in LMS 2.5, the Device Credentials Repository referenced the old IP address.
|
CSCsb15995
|
Campus Manager 4.0 did not display the Device Name as the Display Name.
|
Supported Devices in Campus Manager 4.0 SP 2
Table 2 lists the devices supported in Campus Manager 4.0 SP 2 .
For a list of all devices supported in Campus Manager 4.0 including devices supported in previous versions of SP, see the Supported Devices Table for
Campus Manager 4.0 on Cisco.com (see the "Related Documentation" section).
Table 2 Devices Supported in Campus Manager 4.0 SP 2
Device Type
|
Devices/
Modules Supported
|
sys
ObjectID
|
Topology
|
VLAN Mgmt
|
LANE Mgmt
|
ATM Mgmt
|
User Tracking
|
Path Analysis
|
Minimum Software
|
Cisco 1800 Series Routers
|
1801
|
1.3.6.1.4.1.9.1.638
|
Yes
|
—
|
—
|
—
|
—
|
Yes
|
12.3(14)YT
|
1802
|
1.3.6.1.4.1.9.1.639
|
Yes
|
—
|
—
|
—
|
—
|
Yes
|
Cisco Router 800 Series
|
857
|
1.3.6.1.4.1.9.1.567
|
Yes
|
—
|
—
|
—
|
—
|
Yes
|
12.3(8)YI1
|
877
|
1.3.6.1.4.1.9.1.569
|
Yes
|
—
|
—
|
—
|
—
|
Yes
|
Cisco GSR 12000 series
|
12010
|
1.3.6.1.4.1.9.1.348
|
Yes
|
—
|
—
|
—
|
—
|
Yes
|
12.0(27)S1
|
Cisco Catalyst 3560 Series switches
|
C3560-24TS
|
1.3.6.1.4.1.9.1.633
|
Yes
|
Yes
|
—
|
—
|
Yes
|
Yes
|
12.2(25)SEB2
|
Downloading Campus Manager 4.0 SP 2
Campus Manager 4.0 Service Pack 2 requires the file, cwcm4_0_2_sol.zip, to be downloaded. You can download the file either from Cisco.com or from
Software Center.
Downloading From Cisco.com
You can download the updates from Cisco.com either by selecting Products & Solutions > Network Management > All Network Management Products > CiscoWorks Campus Manager > Download Software Image.
Or
From http://www.cisco.com/pcgi-bin/tablebuild.pl/cw2000-campus.
To download the file from Cisco.com:
Step 1 Locate the package file cwcm4_0_2_sol.zip.
Step 2 Right click the package file. Depending on your browser, select either Save Link As... or Save Target As... to download the file to a temporary working area of your server.
Step 3 Unzip the file to your temporary working area by entering:
# unzip cwcm4_0_2_sol.zip -d/your_temporary_directory
The files are extracted to the cwcm4_0_2_sol directory in your_temporary_directory.
Step 4 Run pkgchk to verify the package integrity.
Downloading From CiscoWorks Software Center
To download updates using Software Center:
Step 1 From CiscoWorks homepage, select Common Services > Software Center > Software Updates.
The Software Updates page appears.
Step 2 In the Products Installed table, select the check box corresponding to Campus Manager.
Step 3 Click Select Updates in the Software Updates page.
The Proxy Server Setup dialog box appears.
Note You will be prompted to enter proxy server credentials only if you have Common Services 3.0 Service Pack 2 installed. Step 4 is not relevant if only Common Services 3.0 is installed.
Step 4 Enter your Hostname/IP Address, Port, username and password.
Enter your Proxy server username and password only if you have configured proxy settings under Common Services > Server > Security > Cisco.com Connection Management > Proxy Server Setup.
The Source Location page appears.
The Available Images page appears with packages for both Windows and Solaris (cwcm4_0_2_sol.zip and cwcm402_sp_win.zip).
Step 5 Select cwcm4_0_2_sol.zip and click Next.
The Destination Location page appears.
Step 6 Enter the location or browse to the location using the Browse button..
Step 7 Click Next.
The Summary page appears. The Summary window shows a summary of your inputs.
Step 8 Click Finish to confirm the download operations.
Note The package file is saved in the user-defined directory in the folder cm.
Installing Campus Manager 4.0 SP 2
Before you install the Campus Manager 4.0 SP 2, make sure your installation environment meets the requirements described in "Hardware and Software Requirements" section.
Caution You cannot install an earlier version of SP on a system that has a later version of SP already installed.
Campus Manager 4.0 SP 2 installation takes approximately 20 minutes. If you opt to back up, package installation might take longer.
Installation Notes
Before installing Campus Manager 4.0 SP 2, note that:
•Campus Manager 4.0 SP 2 installation will delete the files backed up by previous SPs.
•Campus Manager 4.0 SP 2 installation allows you to back up all files that it replaces. The backed up data is used to retain the previous version when you uninstall Campus Manager 4.0 SP 2.
•To uninstall Campus Manager 4.0 SP 2 you must opt to back up the files when prompted.
•You are not prompted to back up the files during reinstallation of Campus Manager 4.0 SP 2.
•You cannot reinstall Campus Manager 4.0 over Campus Manager 4.0 SP 2.
To install Campus Manager 4.0 SP 2 on Campus Manager 4.0:
Step 1 Log in as root on the system.
Step 2 Change to the directory where cwcm4_0_2_sol.zip has been extracted.
Step 3 Run the installation setup script by entering:
A prompt appears:
Press Enter to read/browse the following license agreement:
Step 4 Press Enter to read the license agreement.
The following message appears at the end of the license agreement:
You must accept this License agreement for the installation to
proceed. If you enter N/n, the installation will exit.
Do you accept all the terms of the preceding License agreement?
(y/n) [y]
Step 5 Enter y to accept the license agreement and proceed with the installation, or enter n to deny and quit the installation.
If you have not installed Common Services 3.0 Service Pack 2, this message appears:
Install CiscoWorks Common Services 3.0 Service Pack 2, or later, before installing Campus Manager 4.0 Service Pack 2.
You can download and install Common Services 3.0 SP2 from this location:
http://www.cisco.com/pcgi-bin/tablebuild.pl/cw2000-cd-one
For more details see the Readme Document for Common Services 3.0 Service Pack 2 available at that location.
After installing Common Services 3.0 SP 2, resume from Step 3.
The installation program checks dependencies and system requirements:
•If there is not enough disk space to install Campus Manager 4.0 SP 2, the installation program displays an error message and stops.
•If the minimum requirements are not met, the installation program displays a warning message and continues with the installation.
A prompt appears:
You may decide to uninstall Campus Manager 4.0 Service Pack 2 later.
However, to uninstall Campus Manager 4.0 Service Pack 2, you must
first back up the database and any files that will be affected during
installation now.
You may back up the database and any affected files during this
first-time installation only.
For more information, please see the Campus Manager 4.0 Service Pack 2
Readme.
Do you want to back up now? y/n [y]
Step 6 Either:
•Enter y to back up and continue.
If there is not enough disk space to install and back up SP, the installation program displays an error message and stops.
The installation proceeds without displaying any more questions. After the installation is complete, the system prompt appears.
Or
•Enter n to continue installation without backing up files. A prompt appears:
Cisco recommends that you back up during the installation of
Campus Manager 4.0 Service Pack 2.
You will NOT have the option to back up these files if you
reinstall Campus Manager 4.0 Service Pack 2 later.
Are you sure you want to proceed WITHOUT backing up the database
and other files now? y/n [n]
–If you entered y, the installation proceeds without displaying any more questions. After the installation is complete, the system prompt appears.
–If you entered n, a prompt appears:
You have selected not to proceed with the install.
One or more of the prerequisites failed.
Step 7 Verify the installation by selecting CommonServices > Software Center > Software Update > CampusManager.
The Patches Installed table displays Campus Manager Devices Supported in Campus Manager Service Pack-4.0.2.
Uninstalling Campus Manager 4.0 SP 2
Before you uninstall Campus Manager 4.0 SP 2, note the following:
•If you install any patch after installing Campus Manager 4.0 SP 2, you will not be able to uninstall Campus Manager 4.0 SP 2.
•It takes approximately 15 minutes to uninstall Campus Manager 4.0 SP 2.
•Uninstalling Campus Manager 4.0 SP 2 reverts the system to the previous state from where it was upgraded.
Caution You can uninstall only the latest version of SP which you have installed.
To uninstall Campus Manager 4.0 SP 2:
Step 1 Run the restore script by entering the following at a command line interface:
NMSROOT/bin/perl NMSROOT/bin/restoreCMsp.pl
where NMSROOT is the directory (opt/CSCOpx by default) in which CiscoWorks is installed.
A message appears:
Do you really want to uninstall Campus Manager 4.0 Service Pack 2
(Y/N)
Step 2 Enter Y to uninstall, or enter N to cancel uninstall.
Reinstalling Campus Manager 4.0 SP 2
To reinstall Campus Manager 4.0 SP 2, follow the instructions in the
"Installing Campus Manager 4.0 SP 2" section.
Note You are not prompted to back up the files during reinstallation of Campus Manager 4.0 SP 2.
Known Problems in Campus Manager 4.0 SP
Known problems are unexpected behaviors or defects in Campus Manager software releases.
Note To obtain more information about known problems, access the Cisco Software Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/home.pl. (You will be prompted to log into Cisco.com.)
For a list of known problems in Campus Manager 4.0, see Release Notes for Campus Manager 4.0 on Cisco.com (see "Related Documentation" section).
Table 3 lists the known problem in Campus Manager 4.0 SP 2.
Table 3 Known Problems in Campus Manager 4.0 SP 2
Bug ID
|
Summary
|
Explanation
|
CSCsb52639
|
Device categorization of Router 1801 and 1802 shown wrongly in Device Credentials Repository.
|
Cisco 1800 series Integrated Services Routers 1801 and 1802 are mapped under 1811 and 1812 respectively in Device and Credential Repository.
Workaround:
Patch will be posted on CCO.
|
Table 4 lists the known problems inCampus Manager 4.0 SP 1.
Table 4 Known Problems in Campus Manager 4.0 SP 1
Bug ID
|
Summary
|
Explanation
|
CSCsa55303
|
Topology does not display the ports contained in entity-container for Cisco 2600XM and Cisco 3600 series routers.
|
This problem is caused by the broken entity MIB implementation in Cisco IOS versions prior to 12.3(4)T.
Workaround:
Upgrade Cisco IOS to a version higher than 12.3(4)T.
|
Resolved Problems in Campus Manager 4.0 SP 2
Table 5 describes the resolved problems in Campus Manager 4.0 SP 2
Table 5 Customer Found Resolved Problems in Campus Manager 4.0 SP 2
Bug ID
|
Summary
|
Additional Information
|
CSCsb26532
|
Campus Manager 4.0 SP1 installed files with bin:bin ownership.
|
This problem has been resolved.
|
CSCsb29266
|
Campus Manager 4.0 SP1 did not support C7609 -IOS.
|
This problem has been resolved.
|
CSCsb02952
|
Campus Manager 4.0 SP1overwrote the Custom roles in ACS.
|
This problem has been resolved.
|
Frequently Asked Questions
• How will I know which version of SP I have installed?
• I want IDU 3.0 on Campus 4.0. But, I find only Campus Manager 4.0 SP 2 on Campus 4.0 on Cisco.com. Where can I find IDU 3.0?
• I do not want support for all the devices that you have supported in an SP. Can I select only the devices I want?
• Can I get new device support for CiscoView, Device Fault Manager, or Resource Manager Essentials?
• Why should I back up my database and affected files before I install an SP?
• Can I uninstall SP?
• Where can I find information on the supported devices for Campus Manager 4.0 SP 2?
• When will the next SP be released?
Q. How will I know which version of SP I have installed?
A. To check the version of SP installed on your system, from the CiscoWorks desktop, select CommonServices > Software Center > Software Update > CampusManager.
The Patches Installed table displays the installed version of the applications in the following format:
If Patches Installed Table Displays
|
SP Version Installed is...
|
Campus Manager Devices Supprted in Service Pack 4.0.2
|
4.0.2
|
Q. I want IDU 3.0 on Campus 4.0. But, I find only Campus Manager 4.0 SP 2 on Campus 4.0 on Cisco.com. Where can I find IDU 3.0?
A. The devices that were supported by IDU 3.0 on Campus 3.2 have been rolled into Campus Manager 4.0. There was no IDU 3.0 on Campus 4.0. Campus Manager 4.0 SP 2 is the first SP on Campus Manager 4.0. The devices supported in SPs on Campus Manager 3.2 and Campus Manager 3.3 have been rolled into Campus Manager 4.0 and the later SPs.
Q. I do not want support for all the devices that you have supported in an SP. Can I select only the devices I want?
A. No. The present SP installation framework does not support this feature. Even if you do not have all the supported devices, installing an SP will not adversely affect your network.
Q. Can I get new device support for CiscoView, Device Fault Manager, or Resource Manager Essentials?
A. Yes. The device support packages are available at the following locations:
Q. Why should I back up my database and affected files before I install an SP?
A. You must opt to back up the database and affected files when installation prompts you to. If you do not back up the database and affected files, you will not be able to uninstall Campus Manager 4.0 SP 2.
If you want to revert to the stage prior to SP installation, you will have to uninstall Campus 4.0 and install Campus 4.0 again. After this, restore the database that you backed up before the SP installation.
Q. Can I uninstall SP?
A. Yes. You can uninstall Campus Manager 4.0 SP 2. When you install Campus Manager 4.0 SP 2, you are prompted to back up the database and all affected files. We recommend that you back these up.
Q. Where can I find information on the supported devices for
Campus Manager 4.0 SP 2?
A. You can find the latest information on supported devices for
Campus Manager 4.0 SP 2 on Cisco.com.
To access this, select Products & Solutions > Network Management > All Network Management Products, and then select CiscoWorks Campus Manager > Technical Documentation > Device Support Tables > Supported Devices Table for Campus Manager 4.0.
Or go to:
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/camp_4x/cmgr_4_0/cm40sdt.htm.
Q. When will the next SP be released?
A. The next SP will be released on November 1st, 2005. SPs are released on a quarterly basis—on the first day of February, May, August, and November.
