Guest

Asynchronous Connections

The cisco-nas@external.cisco.com Alias for Dial Technologies

Hierarchical Navigation

Downloads

Document ID: 10312


Contents

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
Subscribe
Unsubscribe
Use the Alias
Guidelines
Other Technology Aliases
Cisco Support Community - Featured Conversations
Related Information

Introduction

This document explains the procedures you use to subscribe and unsubscribe to the cisco-nas@external.cisco.com e-mail alias. This alias is used by interested individuals to exchange ideas, ask questions, and offer suggestions regarding Cisco Access Server platforms (AS5x00, 3600, 2500, and 2600) and Dial Technologies (Point-to-Point Protocol (PPP), dial-on-demand routing (DDR), modems, Integrated Services Digital Network (ISDN), and T1/E1s). This alias contains Cisco employees and customers.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Subscribe

Complete these steps in order to subscribe to the cisco-nas e-mail alias:

  1. Send an e-mail to mailer@cisco.com .

  2. Type subscribe cisco-nas <e-mail_address> in the body. Replace <e-mail_addess> with the e-mail address you want to subscribe to the cisco-nas alias. Do not include signatures, banners, or other text in the body.

  3. Leave the Subject field empty.

  4. You then receive an e-mail that acknowledges you are on the alias. This e-mail contains information on how to unsubscribe from the alias. Save this message for future reference.

  5. Do not send unnecessary e-mails (Testing or Hi) to announce that you joined the alias.

Unsubscribe

Complete these steps in order to unsubscribe to cisco-nas e-mail alias:

  1. Send an e-mail to mailer@cisco.com .

  2. Type unsubscribe cisco-nas <e-mail_address> in the body. Replace <e-mail_addess> with the e-mail address you want to unsubscribe from the cisco-nas alias. Do not include signatures, banners, or other text in the body.

  3. Leave the Subject field empty.

Note: The e-mail address specified in the body must match the address used to subscribe to the alias in order to unsubscribe from the alias. Do not send a message to the alias requesting to be unsubscribed.

Use the Alias

Send an e-mail to the alias cisco-nas@external.cisco.com .

Provide a meaningful subject in the message to ensure a prompt response.

Guidelines

  • Use this alias to exchange design ideas, tips, or valuable information that you have encountered regarding Cisco Access Servers.

  • Do not spam the alias with unrelated e-mails. Non-compliance with this guideline can result in removal from the alias.

  • This e-mail alias is not moderated. Please be courteous of others in this discussion group.

  • Thoroughly describe your problem or question in the e-mail. This avoids unnecessary e-mails requesting more information. Use proper judgment and include appropriate debugs.

  • There is no guarantee that your question or problem will be answered or resolved. However, including all necessary information improves the chances of a satisfactory response.

  • There is no external archive for this alias. We are looking for sites to host an e-mail archive.

Other Technology Aliases

Cisco Support Community - Featured Conversations

Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers. Below are just some of the most recent and relevant conversations happening right now.

&nbsp;

Related Information

Updated: Jan 29, 2008Document ID: 10312