Updated July 9, 2002
February 5, 2002
Products Affected
-
Cisco Unity for CallManager Release 3.1
-
Cisco Unity for PBX/Dual Switch Integrations Release 3.1
Problem Description
When performing a fresh install of Cisco Unity Release 3.1 in an Microsoft Windows NT 4.0 domain, setup part two (Configuration Setup) fails. This issue does not affect sites upgrading from Cisco Unity Release 3.0 to Cisco Unity Release 3.1(2) unless the site removes Configuration Setup to connect to another mail store.
Background
Cisco Engineering found an initial failure when setup tries to bind to the RootDSE in GetEx55Info.
This Field Notice will describe the failure, as well as provide instructions for applying a hot fix to resolve this issue. Once you have met the requirements and applied the hot fix, Cisco Unity Release 3.1 should install successfully.
A hot fix is not available for Cisco Unity Release 3.1(1); you must download Cisco Unity Release 3.1(2) and apply the hot fix.
Problem Symptoms
After running setup, Cisco Unity reboots and begins Configuration Setup to connect Cisco Unity to the desired mail store. At the Collect Mail Store Information dialog box you receive the following error:
Workaround/Solution
This issue is resolved in Cisco Unity Release 3.1(2b). Please upgrade to Cisco Unity Release 3.1(2b) if you are encountering these issues.
DDTS
To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.
|
DDTS |
Description |
|---|---|
|
Fresh installs of Unity3.1 in an NT4 domain fail |
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.